UG10.0 new version features
1. The biggest change is that ug10.0 supports Chinese.
2. Insert-Curve-the last two, one is optimizing 2D curves and Geodesic Sketch, both are new functions.
3. UG10.0 adds new aviation design options and enhanced sheet metal functions.
Divided into:
1)Aviation design flange
2)Aviation design stiffeners
3) Aviation design ladder
4) Aviation design bracket
4. When capturing points, a new "pole" capture is added. When using some commands, surfaces and surface poles can be captured.
5. Creative modeling is a function that has been available since NX9.0. UG10.0 has added many functions and is more powerful than NX9. Rapid modeling is a trend and a key development direction. UG10.0 has added:
1), lofting frame
2), sweep frame
3), pipeline frame
4), copy frame
5), frame polyline
6) Extract frame polylines
6. The insert menu has an additional 2d component
7. Resource bar management in ug10.0 is more convenient. On the toolbar of the sidebar, there is an additional "Resource Bar Options" button, which can directly manage the resource bar.
8. When the mouse operation view is zoomed in or out in ug10.0, it is exactly the opposite of the previous version. The left mouse button + middle button in the downward direction is to zoom out, and the left mouse button + middle button in the upward direction is to zoom in. In the past, it was Not so.
Specific setting method: UG menu - File - Utilities - User default settings - Basic environment - View operation - Direction
9. The trim and extend commands are split into two commands for better use. Moreover, negative numbers can be used for the extension offset value. In the past, negative numbers could not be used before splitting! In other words, the film body may be shortened now.
10. There is an additional draw "section line" command in the drawing, which can sketch the section line of the view.
11. A new "round corner" command has been added to the face deletion function.
12. Newly added: Offset 3D curve, on the UG menu, [Insert] - [Derived Curve] - [Offset 3D Curve].
13. The [Create Block] (i.e. create a box) function in the injection mold tool has two new functions: support for cylinder and cuboid functions has been added to it.
UG10.0 software features
1. The biggest change is that ug10.0 supports Chinese names and Chinese paths.
2. Insert-Curve-the last two, one is optimizing 2D curves and Geodesic Sketch, are both new functions.
3.UG10.0 adds new aviation design options and enhanced sheet metal functions.
4.Aviation design flange
5.Aviation design stiffeners
6.Aviation Design Ladder
7.Aviation design bracket
8. When capturing points, a new "pole" capture is added. When using some commands, surfaces and surface poles can be captured.
9. Creative modeling is a function that has been available since NX9.0. UG10.0 has added many functions and is more powerful than NX9. Rapid modeling is a trend and a key development direction. UG10.0 has added:
10. Lofting frame
11.Sweeping frame
12.Pipeline frame
13.Copy frame
14. Frame polyline
15. Extract frame polylines
16. The insert menu has an additional 2d component
17. Ug10.0 resource bar management is more convenient. On the toolbar of the sidebar, there is an additional "Resource Bar Options" button, which can directly manage the resource bar.
18. In ug10.0, when the mouse operation view is zoomed in and out, it is exactly the opposite of the previous version. The left mouse button + middle button in the downward direction is to zoom out, and the left mouse button + middle button in the upward direction is to zoom in. In the past, it was Not so.
19. The trim and extend commands are split into two commands for better use. Moreover, negative numbers can be used for the extension offset value. In the past, negative numbers could not be used before splitting! In other words, the film body may be shortened now.
20. There is an additional draw "section line" command in the drawing, which can sketch the section line of the view.
21. Added "round corner" command to delete face function.
22. Newly added: Offset 3D curve, on the UG menu, [Insert] - [Derived Curve] - [Offset 3D Curve].
23. [Create Box] in the injection mold tool (that is, create a box) has two new functions: support for cylinder and cuboid functions have been added to it.
UG10.0 FAQ
Simplified Chinese is selected for UG NX10.0 installation, why does it show English when we open it?
1. The Chinese environment variable is modified incorrectly! Just correct it! I don’t know the reason. Maybe I saw a solution on the Internet and then tried to solve it myself. Then I modified the environment variable randomly and incorrectly modified the variable UGII_LANG=simpl_chinese. , either this word is missing or that word is missing. There are quite a few people who have changed it to UGII_LANG=simpl-chinese, mostly beginners.
The correct one should be in the environment variables (in the system variables, not on the user variables. If you don’t know where the environment variables are, please search on Baidu. I will not teach basic computer knowledge here). Add
Variable name: UGII_LANG
Variable value: simpl_chinese
Confirm it!
2. The Chinese environment variable does not take effect immediately! Solution: Don’t move anything, just restart the computer.
This happened to WIN7WIN8 users. When installing, they clearly selected Simplified Chinese, but after opening it, they found that the interface was still in English.
Analysis of the cause of the problem: Since WIN7, the system has very high permission restrictions. The Chinese variables added by the UG installer during the installation process cannot take effect immediately. Of course, it will naturally change to Chinese after restarting the computer. This is unknown to a large number of people.
3. The Chinese language pack was not installed when installing UG, just reinstall the UG software completely.
I don’t know what the reasons are that lead some people to choose [customized installation] instead of [typical complete] installation when installing UG. I don’t know what these people think, or they may be dissatisfied with the installation of UG. The software is too big, 1/5 of the users are in this situation.
Analysis of the cause of the problem: Chinese language variables are not installed
4. The system regional language is not set properly. First change it to English, American or other languages, and then change it back to Simplified Chinese.
UG10.0 update log
1: Brand new interface, refreshing, simple and efficient
2: Performance is getting better and better
Huajun editor recommends:
The installation of UG10.0 is very simple, powerful, and has no installation garbage. It is specially recommended to everyone. Everyone is welcome to download it! This site also hasHaochen CAD,Yaochuang CAD,Huiyi CAD,vray for 3dmax2015,CAD Viewer, available for you to download!
it works
it works
it works