Friends who have just started using Ug10.0 software, if you still don’t know how to create a curved can model, please come and see below a simple tutorial on how to create a curved can model in UG10.0. I hope it can help you.

Open the UG10.0 software and create a new blank model file.

Open the 3D interface of the software, click the rotate icon hidden under the stretch icon, and activate the rotate command.

After the rotation dialog box appears, click directly on the XZ plane in the reference coordinate system to directly enter the sketch environment.

Enter the sketch environment, first activate the spline command, draw a spline curve in the sketch work area, manually adjust the shape of the spline curve to make it more like the cross-section of a small arc-shaped can, activate the outline command, and draw it Form a closed sketch, as shown in the figure, and then click Finish.

Back to the rotation dialog box, for the rotation axis, we just click on the Z axis, then look at the preview effect, and click OK.

Click the shell icon in the toolbar to activate the shell command, and then the shell dialog box will appear. Select the upper surface of the entity and set the thickness to 2. If the software prompts that the preview effect cannot be calculated, you can consider clicking Reverse to adjust the shell. Direction, you can click OK after the preview is successful.

Click the edge rounding icon in the toolbar to activate the command, then click on the edge of the entity that needs to be rounded, set the radius to 0.5, and click OK to complete the creation of the small tank model.

Hide the base coordinate system in the design tree, then select Real Shading in Rendering and assign white gloss to the entity, you will have the effect as shown below. At this point, the modeling and rendering of the white can are completed.

Friends who still don’t know how to create a curved can model in UG10.0, don’t miss this article brought by the editor.