Laboratory Safety Management System Safety Code
1. The laboratory should be kept quiet, and no loud noises, talking or laughing are allowed.
2. All equipment in the laboratory must be used with caution.
3. All instruments and equipment in the laboratory are not allowed to be dismantled without permission, and are not allowed to be taken outdoors.
4. Do not touch any electrical equipment and power sources in the laboratory to avoid the risk of electric shock.
5. No power supply can be connected to any line without the consent of the instructor.
6. When operating the power switch, do not operate it with both hands at the same time, and avoid facing the switch.
7. If the fuse blows after the power is turned on, the cause of the fault must be checked and the power can be turned on again after removing the obstacles. 8. Any instruments and electrical appliances must not be used without being familiar with their use. Before using any power supply, you must understand its voltage value.
Laboratory safety management system content
1. Develop safety management systems for each laboratory in strict accordance with the college’s comprehensive management requirements.
2. Do a good job in "waterproofing, fireproofing, and anti-theft" work. Before and after get off work, carefully check whether the laboratory doors, windows, and faucets are closed, and whether the power supply is turned off.
3. Personnel who come to the laboratory for contact work must be warmly received, recorded carefully, and reported in a timely manner.
4. Place fire-fighting equipment in an obvious and easily accessible location. It is prohibited to use electric stoves and other high-power-consuming instruments in the laboratory (except for experimental needs) to prevent the occurrence of fire.
5. Each laboratory must regularly check the power supply system of the laboratory under its control, and detect safety hazards promptly and handle them appropriately.
6. The computer center should regularly check whether there is water accumulation in the steel trough on the ground, and build high walls around low-lying ground to prevent water from seeping into the steel trough and causing fires.
The editor recommends:
The laboratory safety management system is a free template. You can download the source file for you to edit, modify and replace. Huajun Software Park also providesschool safety management system,Limited space operation management systemdownload.
it works
it works
it works