Function introduction
1. If you know any two values of frequency, capacitance and inductance, you can calculate another unknown value.
2. High-frequency cards (such as MF1 cards, etc.) and low-frequency cards (such as ID cards, etc.) can select the relevant frequency, automatically calculate the corresponding frequency/capacitance/inductance values, and have relevant unit name prompts.
For example: KHz (kilohertz), MHz (megahertz), pF (parallel frequency), etc.
3. The software is green software and easy to implement. It is an auxiliary adjustment tool for capacitance/inductance/frequency of the above-mentioned high-frequency card frequency tester/low-frequency card frequency tester.
4. Since the frequency of high-frequency cards is generally attenuated by 0.3-1MHz after lamination than before lamination (the chip module is only welded with the antenna and not laminated), while the frequency of low-frequency cards is generally attenuated by 0.3-1MHz after lamination (the chip module is not laminated). The module is just welded with the antenna, not laminated) and the inductance/capacitance value of the antenna/capacitor can be adjusted in advance through the small software "Frequency Tester Calculation Software".
5. No need to connect with frequency tester, free green software.
it works
it works
it works