Software features
1. No packet loss when receiving or sending.
2. Supports direct listing of available serial ports;
3. Support hexadecimal sending and receiving;
4. Support scheduled sending;
5. Support sending received data;
6. Support sending after receiving the end of the frame;
7. You can remember the serial port parameters used last time, eliminating the tedious steps of each configuration;
8. Supports commonly used baud rates of 110 ~ 921600bps;
9. The port range is COM1-COM255, supporting expansion port (USB to RS232);
10. Ability to set parity, data bits and stop bits;
11. Can send and receive data in characters or hexadecimal, and supports the sending and receiving of Chinese characters;
12. Support sending file data;
13. The data sending area allows you to set the sending cycle and automatically send data;
14. Support keyboard input and send keyboard data to the serial port;
15. Supports regular saving of receiving window data, making it easy to view long-term debugging record information;
16. Effectively detect communication errors to avoid software crashes (such as USB to serial port device pull-out detection);
17. The data receiving window and file sending adopt multi-thread design.
18. With Modebus CRC16 check, CRC16 check, accumulated sum check, XOR check and Modebus LRC calculation tool for files and data frames. data sent
The calculation result can optionally be added to the frame, and the verification result will be packaged and sent together with the data frame.
19. Support 1Kxmodem file sending, sending and receiving functions.
20. Supports some TTY emulation terminal debugging protocols and can easily debug Linux commands.
21. Supports terminal command control, and can control the debugging serial port receiving window data clearing and saving by receiving commands.
How to use
1. After downloading, do not run the software in the compressed package and use it directly. Unzip it first;
2. The software supports both 32-bit and 64-bit operating environments;
3. If the software cannot be opened normally, please right-click and run in administrator mode.
Change log
Fix the bug in the process of opening the serial port
it works
it works
it works