- Green versionView
- Green versionView
- Green versionView
- Green versionView
Thinkpad x1 carbon2017 driver installation method:
IMPORTANT: Do not touch the panel during calibration.
Important: You need to restart your computer after calibration.
Download and install (recommended):
1. Log in to the Windows operating system as an administrator
2. Click the Download Now button, and when the file download dialog box pops up, select "Save"
3. Download the driver to the location you specify
4. Double-click to run the downloaded driver file and follow the on-screen prompts.
Direct installation (not recommended):
1. Log in to the Windows operating system as an administrator
2. Click the Download Now button, and when the file download dialog box pops up, select the "Run" button
3. The system will pop up a security warning, select "Run"
4. Follow the on-screen prompts.
Support system:
Microsoft Windows 8 64-bit
Microsoft Windows 7 64-bit
Supported models:
ThinkPad X1 Carbon, New X1 Carbon (touch model)
Manual calibration:
1. Enter the directory where the driver is decompressed. The default is C:DRIVERSX1 Carbon Touch Calibration Program.
2. Double-click eGalaxHWCalibration.exe.
Notes and limitations:
<Note>
- If a "Find Device Fail!" message appears, the touch fails, or the touch device cannot be found in the system. Please confirm whether your machine is a touch model. If so, please contact the repair station.
<Limitations>
- After the program is executed, the following warning message may appear: "Program Compatibility Assistant. This program might not have
installed correctly" . Please ignore.
Update instructions:
<1.0.0.4>
- (Correction) Added notes and limitations description.
- (New) New release.
Lenovo thinkpad x1 carbon2017:
Useful
Useful
Useful