Monitor dvr player features:
Video input channels 4/8/12/16/25/36
Video compression algorithm H. 264/MPEG-4
Playback resolution QCIF/CIF/2CIF/4CIF
Video frame rate PAL: 0-25 frames/second, NTSC: 0-30 frames/second
Compression code rate 80M-500M arbitrarily adjustable (40M without video)
Number of audio input channels 4/8/12/16
Video output: 16 video streams
Transmission method: supports DDN/LAN/WAN/PSDN and other network transmission;
Network client: supports multiple sub-controls to be displayed at the same time (one-to-many; many-to-one transmission possible)
Image capture: Capture and store on-site images
Two-way intercom: The general monitoring center can intercom with each network hard disk video host
Remote management: The master control center can realize remote management of all hosts
PTZ control: can control the PTZ, lens, and remotely monitor local images
Dual stream: The network transmission image format can be adjusted according to the actual bandwidth to CIF, QCIF, QQCIF. Regardless of the format of the network transmission image, the front-end host video recording is CIF or D1.
Operating system WIN2000/WINXP/WIN2003
Video timing/manual/alarm/motion detection, PTZ control, character overlay, etc.
Playback supports 1 and 4-channel real-time playback, duplex function, partial magnification, image capture, speed retrieval
Alarm function video loss alarm, alarm linkage, alarm recording, alarm input and output, alarm upload image
Local matrix: Expandable matrix card or decoding card to enable local video to be uploaded to the TV wall.
Local alarm: The alarm card can be expanded and connected to alarm equipment.
IE service: You can install IE service to browse videos on LAN or WAN IE.
Kind tips:
DVR2009 video surveillance software requires no registration, free use, and unlimited use.
After decompression, run dvr2009.exe directly.
Please also check whether the video capture card driver has been installed correctly.
it works
it works
it works