SoftCooler II software features
1.Perform the operation
The function of an instruction is often implemented by a series of operations performed by components in the computer. The CPU should generate corresponding operation control signals according to the function of the instruction and send them to the corresponding components, thereby controlling these components to act according to the requirements of the instruction.
2. Control time
Time control is to implement time timing for various operations. During the execution of an instruction, what operations are performed at what time should be strictly controlled. Only in this way can the computer work in an orderly manner.
3. Processing instructions
This refers to the execution sequence of instructions in the control program. There is a strict sequence between the instructions in the program, and they must be executed strictly in the order specified by the program to ensure the correctness of the computer system.
4. Process data
That is to perform arithmetic operations and logical operations on data, or perform other information processing.
SoftCooler II software features
1. One-click cooling;
2. Overheating prevention and protection;
3. Add blacklist.
4. Real-time equipment temperature monitoring;
5. Dynamic overheating application detection;
SoftCooler II installation steps
1. Download SoftCooler II at the Huajun Software Park and get a software compressed package.
2. Then decompress the software compressed package and obtain SoftCooler.exe.
3. Finally, double-click to open SoftCooler.exe and you can use it.
SoftCooler II cools down to normal CPU temperatures
It is guaranteed to be generally stable within a temperature rise of 30 degrees. In other words, the CPU's withstand temperature is 65 degrees. Calculated based on the maximum temperature of 35 degrees in summer, the CPU temperature is allowed to rise to 30 degrees. By analogy, if your ambient temperature is now 20 degrees, the CPU should not exceed 50 degrees. Of course, the lower the temperature, the better. No matter how much you overclock, don't make your CPU more than 30 degrees higher than the ambient temperature
SoftCooler II is cool to the end. Frequently asked questions about CPU heating.
The temperature rise is due to the fact that the heat generated by U is greater than the heat dissipated by the radiator. Once the heat generated and the heat dissipated tend to be balanced, the temperature will no longer rise. The amount of heat generated is determined by the power of U, and the power is proportional to the voltage. Therefore, to control the temperature well, you must control the core voltage of the CPU. But it’s easy to say that. If the voltage is too low, it will cause instability. This contradiction is especially obvious when the overclocking range is large. Many times the system will have a blue screen before the CPU temperature reaches the critical value. At this time, the main culprit affecting system stability is not the temperature but the voltage. Therefore, how to set the voltage is very important during extreme overclocking. If it is set high, the radiator will not be able to withstand it; if it is set low, the U will not be able to withstand it.
The temperature measurement methods of various motherboards are different. Even for motherboards of the same brand and model, due to the difference in the distance between the temperature measurement probe and the CPU, the measured temperature will vary greatly. Therefore, it is unscientific to generally say how many temperatures are safe. I think I can run super by myself in the summer when the room temperature is higher. Pi or 3dmark, as long as it passes stably, you don't have to trust the temperature data of the software test too much.
Comparison of similar software
CPU-Z (cpu detection tool)Supports CPU detection software under 64-bit systems. In addition to using Intel or AMD's own detection software, it is the most commonly used software of this kind. CPU-Z The supported CPU types are quite comprehensive, and the startup speed and detection speed of the software are very fast.
cpu temperature detection softwareThe official Android version is a software for mobile phone CPU information detection. The CPU temperature detection software can obtain the mobile phone CPU temperature in real time. In addition, it can also test the CPU usage rate. , CPU frequency, etc..
Huajun editor recommends:
SoftCooler II is cool to the endIt can also directly optimize the CPU unit, which is suitable for all types of CPUs. One-click cooling and cleaning. This software is powerful and easy to operate. I hope you will like it. Welcome to the Huajun Software Park to download!
Useful
Useful
Useful