FlyMcu simulation software

FlyMcu simulation software is the latest serial port programmer for stm32. FlyMcu simulation software connects to the serial port used for communication and can easily program programs. Use eagleIAP to program applications through IAP, and use ISP to program IAP boot programs and applications.

Basic introduction

FlyMcu simulation software includes in-circuit programming (ICP) and in-application programming (IAP), which have demonstrated advantages over traditional programming socket programming on many occasions. This is due to two important development trends of microcontrollers in recent years:

1. FLASH has become the main technology for microcontroller program memory, making firmware updates increasingly easier and feasible;

2. Chip packaging is becoming more and more sophisticated, making it difficult to move the chip, and programming sockets are becoming more sophisticated and expensive.

Things to note

1. For STM32F407 download, due to the firmware problem of STM32F407 itself, it is recommended that the baud rate should not exceed 115200! ! ! It is best to use a baud rate of 76800, otherwise the download may fail.

2. It takes a long time to erase the flash of STM32F407, so please wait patiently when downloading.

3. Perfectly supports the one-click download circuit of the Zhengdian Atom development board.

Change log

Important updates

1. Added support for stm32F4 series.

2. No longer limit the baud rate.