ahci driver

ahci driverCan give full play to the potential acceleration function of SATA hard drives, increasing the speed by 30%hard driveReading and writing speed. If your computer has a blue screen on startup and restarts, you need the ahci driver to repair it. Huajun Software Park provides you with free download of ahci driver 2024. Friends who like ahci driver come to Huajun Software Park to download and experience it!

ahci driverInstallation method

​​ 1. After downloading the ahci driver from this site, use 360 compression software to decompress the file. Open the P43 45 AHCI folder. There are ahci driver 32-bit and ahci driver 64-bit for you to choose from. Select the folder that matches your computer system, and then select the PREPARE folder. After entering the folder, click IMSM_PRE.inf.

​​ 2. Restart the computer and enter the computer BIOS system. After entering the BIOS system, set the SATA working mode to the AHCI option. The method to modify the hard disk mode is "AHCI", and some are Enabled or Disabled.

      Note: The methods of entering the BIOS system are different depending on the motherboard of the computer. I will not introduce it to you too much. If necessary, you can go to Baidu by yourself.

​​ 3. When the system startup is completed, the system prompts the Found New Hardware Wizard, click [Finish].

​​ 4. Select the new hardware guide, click [Install from the list or specified location], and click [Next] after completing the selection.

5. In the pop-up browse folder option, find the AHCI driver root directory you just decompressed, and click [OK] after finding it.      

​​ 6. After completing the Find New Hardware Guide, click [Finish].

​​ 7. When the prompt "Windows has been installed with a new device and needs to be restarted to take effect" appears, click [Yes] to restart the computer.

​​ 8. After restarting the computer, right-click My Computer and click "Manage" in the pop-up options. After entering the computer management interface, click Device Manager and then click IDE ATA/ATAPI controller. When you see the words AHCI, it means the ahci driver is installed.

Developer GG said there are really no bugs this time~