Omron plc programming software cx-programmer

Omron plc programming software cx-programmerThe official version is a more practical plcProgrammingTools. The official version of Omron PLC programming software cx-programmer can support multiple series of instructions such as cs/cj, cv, c, fqm, cp1h/cp1l, cp1e, etc., and supports the full range of omron PLCs. andOmron plc programming software cx-programmerYou can also set it in the IO tableCPU Bus units and special units do not need to manually set and distinguish addresses. Huajun Software Park provides download services for Omron PLC programming software cx-programmer. Everyone is welcome to download and use it!

Omron plc programming software cx-programmer software functions

1. Programming language

Mainly divided into instruction list programming, ladder diagram programming and sfc sequential function chart programming

2. System program

The system program is the basis for the work of the plc. It is written in assembly language and has been solidified in the rom system program when the plc leaves the factory.memory, no user intervention is required

3. User program

​​​​​​​​​​​​​​​​​​​​​​​​​​? The user program is input into the user memory of the plc through the programmer, and then the plc is run to complete this specific task.

Omron plc programming software cx-programmer software features

​ ​ 1. Can display the network structure graphically

​ ​ 2. Multi-language support, Chinese version can be installed

3. You can set the cpu bus unit and special unit in the io table. There is no need to manually set and distinguish addresses.

​ 4. The CPU bus unit and special unit settings of the cx-one software can be compared online with the CPU bus unit and special unit settings of the actual PLC, and any discrepancies will be marked.

5.cp, cj, cs series CPUs can support offlineSimulation, the ns series touch screen also supports online and offline simulation, that is, the touch screen and PLC can be put together for offline simulation, which is more suitable for people who are new to PLC.

Omron plc programming software cx-programmer installation steps

​ 1. Download the Omron plc programming software cx-programmer in the Huajun Software Park, unzip it to the current folder, and click CXP 9.3 in it The green installation version of the .exe application is being installed at this time.

​​ 2. Then we need to select the last item to replace all files.

3. Until the installation is completed, click the start menu to run cx-programmer.

How to use Omron plc programming software cx-programmer

How to add a desktop shortcut to CX-Programmer?

1. After the installation is complete, open [Start] in the lower left corner of the computer interface and enter "CX-Programmer" in the [Search programs and files] input box.

2. In the list of found program files, select the .exe file with the full name "CX-Programmer", right-click the mouse and select [Open file location]

3. As shown in the figure, select the startup file, right-click the mouse and select [Send to]-[Desktop Shortcut]

​ 4. Return to the computer desktop and you will see the desktop shortcut as shown in the picture.

Omron plc programming software cx-programmer FAQ

      Question: How many kinds of Omron PLC are there? What kind of programming are used?Software?

Answer: CPM series, CP series, C series, CQM series, CJ series, CS series and motion controllers, etc. NJ, NX series large PLC software using Sysmac Studio. If you want to get started, it is better to use the CP1H or CJ series, because these two models basically support all of Omron's command systems and can be simulated in software. Omron uses one programming software: CX-Programmer. Earlier software such as SSS is basically unusable now.

      Question: Omron plc programming software cannot be uninstalled?

Answer: Click "CXP 9.3 Green installation version.exe", automatically decompressed and installed on the system disk. You cannot uninstall using the software that comes with the system, nor can you use the files in the software installation package to uninstall, because there is only one file in the installation package.

The solution is as follows:

​ ​ 1. Run CXOneRemover, the special uninstall tool for CX-One software, and restart the computer

​ ​ 2. Download a very useful and powerful uninstall tool "Geek Uninstaller", uninstall "CX-server" first, and then uninstall "CX-One", otherwise it is easy to make mistakes.

      Question: How does CX-Programmer set the memory of function blocks/SFC?

Answer: Select PLC—Function Block/SFC Memory—Function Block/SFC Memory Allocation in the menu bar.

Function: Modify the memory allocation of function block/SFC.

      Question: Does CX-Programmer version 9.3 support Windows 10 (WIN10)?

Answer: Not supported. CX-Programmer 9.61 and above (i.e. CX-ONE 4.40 and above) supports Windows 10 (WIN10).

Comparison of similar software

      walnut programmingThe official version is a very excellent zero-based graphical programming tool for children aged 6-12. The Walnut programming client has powerful functions and can help children learn programming easily. The Walnut programming software is convenient and easy to use. It provides online tutoring by professional teachers and supports one-on-one comments, which can help children increase their interest in programming and improve their programming abilities.

      Mitsubishi plc programming softwareThe official version is a powerful programming logic control tool. The latest version of Mitsubishi PLC programming software can use digital or analog signals to perform logical operations, sequence control, timing and other instructions to facilitate users' control and production of machines. Mitsubishi plc programming software is suitable for all series of programmable controllers such as Q, QnU, QS, QnA, AnS, AnA, and FX.

Omron plc programming software cx-programmer update log

​​ 1. ST editor viewing function changes

​ ​ 1) Add the function of viewing line number indication in ST editor. You can also specify the line number to jump to.

​ ​ 2) Select the function and registration mark from the word list.

3) When you press the Tab key while the control statement startup function is selected, you can enter the control statement frame very easily.

4) The red wavy line indicates that there is a syntax error in the ST program. No compilation checks are required to detect this.

2. Intelligent input viewing function in FB ladder diagram

You can view the ladder diagram on a task and the FB ladder diagram in smart input mode in the same way.