ZTE USB card reader driverIt is a driver for the ZTE USB card reader series. The ZTE card reader does not respond when connected to the computer? It may be that your computer cannot recognize it. After installing the ZTE card reader USB driver, common types of card readers can be recognized normally. Downloading this program for the card reader driver can basically optimize card reading. It is designed using a computer environment and is a computer terminal smart card peripheral.
Driver introduction: 1. Super hardware detection capability, automatic intelligent driver update uses advanced hardware detection technology, and automatically installs the most appropriate driver for your load.
In addition to installing drivers for unknown devices, it can also automatically detect driver upgrades to keep your PC in optimal working condition at all times.
2. Advanced driver backup technology makes driver backup easy
For devices whose drivers are difficult to find online, the backup technology can perfectly implement the driver backup process. Hardware drivers can be backed up as separate files, Zip archives,
With self-extracting programs or automatic installation programs, you no longer have to worry about system reinstallation.
3. Safe driver uninstall function to quickly clean up driver residues
Incorrectly installed or invalid drivers remaining in the system may affect the operation of the operating system. You can safely uninstall the driver or clean up the driver residue of the operating system.
Keep your hardware in top working condition at all times.
FAQ 1. How to install the card reader driver?
A separate card reader does not require additional drivers in XP systems.
The card reader built into the notebook generally requires driver installation. For example, the FlashMedia driver. If there is a driver disk, run the installation program in the driver disk; if it is not a driver in setup mode, in the device manager, right-click the card reader device with an exclamation mark or question mark, upgrade the driver, and specify the driver path.
Frequently Asked Questions and Repairs of Card Readers
2. Does the card reader driver have to be the same model as the computer?
The card reader originally exists so that the computer can smoothly read and write different storage media, so it basically does not require a driver. If the card reader cannot be recognized when it is plugged into the computer, it may be a problem with the USB interface of the computer. You can try another USB interface. If the front USB interface cannot be recognized, it may be due to insufficient power supply. You can try plugging it into the USB interface at the rear of the chassis.
3. Why can’t the card reader read the memory card?
Generally, the memory card and the card reader are in poor contact. The computer only recognizes the card reader and does not connect to the memory card. Check whether the memory card is inserted. After the memory card is connected, the indicator light of the card reader will flash several times. This situation will occur with many card readers.
There is a part inside the card reader that connects the semiconductor to the USB slot. However, the connection part wears out due to repeated plugging and unplugging of the card reader, resulting in poor contact! So sometimes the card can be read! But the probability is very low! You can buy a more expensive card reader! For example, the multi-function card reader directly eliminates the loss of contact caused by wear and tear!
Mobile phone SIM card reader
4. It can be used on mobile phones, but cannot read cards on computers.
The card reader is good, but the memory card cannot be read on the computer, but it can be read on the mobile phone.
If this happens, the memory card must have a password set on the phone. You can only remove the password by entering the memory card menu of the phone.
5. Has been write-protected
When using a card reader to read a card, a message appears that the MMC card is write-protected.
The first is that the card reader is USB2.0. The computer version is 1.0.
The second situation is that other USB devices have been connected to the same USB interface before. Such as mobile hard disk, MP3, etc.
The third type is when multiple USB devices are connected to one computer. This may be the case.
The fourth situation is the situation that everyone least wants to happen. That means there is something wrong with the card or card reader.
Don’t worry when such a prompt appears. The first solution is to replace the hardware device. (PS: However, the probability of this problem occurring between 2.0 and 1.0 is not very high. In other words, it can still be read). For example, add a 2.0 USB expansion port. You can buy this in computer stores and it’s not expensive.
The solution to the second problem is simpler. Just change the USB port and plug it in. As long as it's not one you've taken before. Although I don't know what the difference is between the two. But this is what I did after this problem occurred. And it works all the time.
The third problem is even simpler. No need for me to say it. Since there are too many. Just unplug a few of them.
Anyway. After this prompt appears... Friends, you may wish to check your machine. Check to see if any of the above conditions exist. If anything. You can try it. My card has been unable to delete things on the computer, but it can be deleted on the phone. Solved it by changing the socket.
