How to set the highlight color in wireshark - How to set the highlight color in wireshark

Wireshark is an open source network protocol analysis tool that can be used to capture and analyze network data packets, helping users gain an in-depth understanding of network communications and troubleshoot network faults and security issues. Wireshark can parse most LAN protocols, such as TCP, UDP, IP, HTTP, FTP, DNS and other common protocols, and can even parse some less common proprietary protocols or custom protocols. Next, let the editor of Huajun explain to you how to set the highlight color in wireshark and how to set the highlight color in wireshark!

first step

Start the Wireshark software. Start capturing network traffic or open a saved capture file. In the list of captured packets, find and select a protocol row (for example, IP, TCP, etc.) that you want to set the highlight color.

Step 2

Right-click on the selected protocol line. In the pop-up right-click menu, select the first highlight-related option, usually "Mark/Unmark Packet" or a similar option to highlight. But please note that this option is used to mark individual packets, not to set the protocol highlight color. If you want to set the highlight color for the entire protocol, continue to the next step.

Step 3

Right-click anywhere on the selected protocol line (not necessarily in the packet list, sometimes in the protocol tree). In the pop-up right-click menu, select the "Colorize Conversation" option. In the submenu, select the protocol you want to color (e.g. IP, TCP, etc.) and then select a color.

Step 4

You can also click on the color settings icon in the Wireshark toolbar (usually a palette or similar icon). This will open a color settings window showing the current color blocks for the different protocols. In this window, you can double-click on the color block you want to edit.

Step 5

After double-clicking the color block, a color editing interface will pop up. In this interface, you can select the color you want to set and adjust its brightness, saturation and other properties. Once you've selected your color, click "OK" or a similar button to apply the changes.

Step 6

Once you've finished setting the colors, Wireshark will automatically apply the changes. You can now see in the packet list that the packets of the selected protocol are highlighted in the color you set.

The above is how to set the highlight color in wireshark and the method of setting the highlight color in wireshark compiled by Huajun editor for you. I hope it can help you!