How to connect flashfxp to the server

Today, we will share with you how to connect flashfxp to the server. We know that if you want to upload the completed files to the designated website through flashfxp, you need to connect to the server first. So, follow the editor of Huajun to learn about it.

1. Open FlashFXP, first click "Options" on the toolbar - "Parameter Settings";

How to connect flashfxp to the server

2. Select "FTP" under "Connection" on the left, select "Passive Mode (PASV)" for the connection mode, and click "OK" to exit the settings;

How to connect flashfxp to the server

3. "Quick Connect" button in the session menu;

How to connect flashfxp to the server

4. Set the connection parameters, type FTP, fill in the address of the FTP server (local), and do not change the port. The username and password can be obtained from the administrator. If anonymous login is allowed, check "Anonymous". If there is a remote address, you can also fill it in. After filling in, click "Connect";

How to connect flashfxp to the server

5. If the address, username, and password are correct, you can successfully connect to the FTP server.