usb to can driver installation

The official version of the usb to can driver installation is a driver needed for interface type conversion. Install the latest version of the usb to can driver if you want to change your computer's USB interface to a CAN type interface. If the usb to can driver is installed without this driver, it cannot be used normally. You must use this driver to complete the interface type conversion.

Introduction to usb to can driver installation software

The USB to CAN driver is a necessary driver for the USB to CAN interface, it is a ZLG USBCAN driver, supported systems include win98/xp_win7_win8 (32-64-bit systems). Supported hardware is: IDUSBVID_0471&PID_1200. This is a driver that converts the USB interface into a network card interface. Now all computers are equipped with a network card interface. It is mainly aimed at some old motherboards or some professional motherboards, which may not have a network card interface or a network card. Used when the interface is damaged.

Features of usb to can driver installation software

The USBCAN-E/2E-U high-performance CAN interface card in the USB to CAN driver is a high-performance CAN-bus communication interface card that is compatible with the USB2.0 bus full-speed specification and integrates 1~2 CAN interfaces. The latest version of the USB to CAN driver uses the USBCAN-E/2E-U high-performance CAN interface card. The PC can be connected to the CAN-bus network through the USB bus to form a field bus laboratory, industrial control, high-performance community, automotive electronics network, etc. CAN-bus network control node for data processing in the CAN-bus network field.

usb to can driver installation software instructions

                      Controller Area Network CAN (abbreviated as CAN) was originally developed by the German Bosch company in 1983 for automotive applications. It is a serial communication network that can effectively support distributed control and real-time control and belongs to the field bus (FieldBus) category. In November 1993, ISO officially promulgated the CAN international standard for controller LAN (ISO11898), paving the way for the standardization and promotion of controller LAN. At present, it has become one of the most widely used open fieldbuses in the world.

usb to can driver installation update log

​ 1. Optimized some functions

​ 2. Solved many unbearable bugs