Frequency tester calculation software

The frequency tester calculation software is a small software for calculating card frequency, chip capacitance, and antenna inductance.

Function introduction

1. If you know any two values ​​of frequency, capacitance and inductance, you can calculate another unknown value.
2. High-frequency cards (such as MF1 cards, etc.) and low-frequency cards (such as ID cards, etc.) can select the relevant frequency, automatically calculate the corresponding frequency/capacitance/inductance values, and have relevant unit name prompts.
For example: KHz (kilohertz), MHz (megahertz), pF (parallel frequency), etc.
3. The software is green software and easy to implement. It is an auxiliary adjustment tool for capacitance/inductance/frequency of the above-mentioned high-frequency card frequency tester/low-frequency card frequency tester.
4. Since the frequency of high-frequency cards is generally attenuated by 0.3-1MHz after lamination than before lamination (the chip module is only welded with the antenna and not laminated), while the frequency of low-frequency cards is generally attenuated by 0.3-1MHz after lamination (the chip module is not laminated). The module is just welded with the antenna, not laminated) and the inductance/capacitance value of the antenna/capacitor can be adjusted in advance through the small software "Frequency Tester Calculation Software".
5. No need to connect with frequency tester, free green software.