Retaining wall calculation software

Retaining wall calculation softwarelatest version

The latest version of the retaining wall calculation software is an engineering quantity calculation tool suitable for use in the construction industry. Retaining wall calculation software is an auxiliary for building retaining walls used to calculate cross-sectional geometric data, elevation settings, calculation limits, ground loads, material bulk density, etc. The retaining wall calculation software also has a variety of built-in data information and parameter settings to help users perform calculations in the fastest and most efficient way. Huajun Software Park provides download services for retaining wall calculation software. To download other versions of retaining wall calculation software, please go to Huajun Software Park!

Retaining wall calculation software software features

​ 1. Filling parameter setting of soil layer data

2. Geometric data of cross-section information and elevation settings

3. Supports the setting of soil parameters, calculation limits, ground load, and material bulk density

Retaining wall calculation software software instructions

1. Base tilt: soil (<=1:5), stone (<=1:3.33)

​​ 2. Filling bulk density: filling soil (17.0~18.0), filling stone (19.0~20.0), filling lime soil (17.5)

3. Base friction coefficient: cohesive soil (0.25~0.4), sand (0.40), gravel (pebble) soil (0.40~0.50), soft rock (0.40~0.60), hard rock with rough surface (0.60~ 0.70)

4. Bulk weight of masonry: brick masonry (18.0), dry block stone or rubble (21.0), mortar rubble (23.0), mortar rubble or aggregate stone (24.0~25.0), concrete or rubble concrete (24) , reinforced concrete (25.0～26.0)

5. Internal friction angle: hard-to-weather stone blocks (45-50); hard-to-weather gravel and pebbles (40); small pebbles, gravel, gravel, coarse sand, stone chips, gravel soil (35); medium, Fine sand, pebble (gravel) soil, weathered stone materials, general soil (30~35); silt soil (20)

6. External friction angle: smooth wall back (δ=0); stone wall (δ=φ/2~2*φ/3); stepped stone wall (δ=2*φ/3); imaginary Wall back (δ=φ)

Retaining wall calculation software instructions

​​ 1. Download the file and find "Retaining Wall Verification.exe" and double-click to run it;

​​ 2. Enter the main interface of the software, you can enter various data, including viewing the original data;

3. The file menu includes preparations for saving, printing, and exiting the program;

​​ 4. You can quickly view the software description and click OK to close it;

5. You can input various original data in the red box in the picture below;

​​ 6. After entering the selection, click the Run button in the project;

​​ 7. You can quickly view the calculation results;

Comparison of similar software

      Gravity retaining wall design softwareMost structures that utilize the weight of the retaining wall to resist the overturning moment caused by soil lateral pressure are mostly made of rubble. Gravity retaining wall design software is different from those cantilevered retaining walls made of reinforced concrete and anchored retaining walls composed of steel cables.

      Basement retaining wall calculation softwareIt is a tool specially developed by Beijing China Railway Construction Engineering Design Institute to calculate basement retaining walls. Users only need to provide the basic data of the basement retaining wall to quickly perform load calculation, strength calculation and crack calculation through this software. It is very It’s easy to use, download it and use it if you need it.