Cisco TFTP ServerCiscoTFTP

Produced by CISCO TFTP server, often used for IOS upgrade and backup work of CISCO routers. It can also be used for individuals to establish Tftp servers for file transfer. The software comes with a command line TFTP client, the file name is TFTP.EXE, which can be used to test the TFTP server you established.
Known issues:
When multiple clients access the TFTP server at the same time and "Show Transfer Process" in "Options" is turned on, the TFTP server will hang. To avoid this problem, please cancel the "Show file transfer progress" option in "Options".

TFTP client usage:
Command format:
TFTP [-i] [-b blocksize] [-v] [-t timeout] [-s] host [GET | PUT] source [destination]

-i transfer in binary mode
-b Block size to use during transfer (default 512 bytes). 8-65464 bytes
-v Display detailed information during transfer (redundant mode).
-t timeout (default is 10 seconds). Can be set to 1-255 seconds
-s does not use the tsize option (enabled by default).
host specifies the local or remote host
GET download file
PUT upload file
source specifies the file name to be transferred
destination specifies the destination of the transfer

Example:
tftp -i 192.168.0.8 get 1.txt
Download the file 1.txt from the host 192.168.0.8 to the current directory

tftp -i 192.168.0.8 put test.txt
Upload the test.txt file in the current local directory to the 192.168.0.8 host