Hard drive detection and repair tool master

Hard drive detection and repair toolIt is a very practical hard drive repair tool. Although the hard drive detection and repair tool is very simple to operate, it is very powerful and helps users quickly repair their hard drives. In addition, there are many special functions, including helping users recover accidentally deleted files, solving some other hard drive problems, etc., bringing users a convenient experience. Huajun Software Park provides you with free download of Hard Drive Detection and Repair Tool Master 2025, come and experience it!

Hard drive detection and repair tool features

The Hard Disk Detection and Repair Tool Master can not only diagnose hard disks with ATA/SATA/SCSI interfaces, but also supports storage devices such as RAID arrays, USB/Firewire (1394) interface hard disks, and Flash cards. It executes standard ATA/SATA/SCSI commands, so it can be used no matter what type of hard drive it is. Its functions include: scanning the disk surface, clearing, viewing SMART attributes, running SMART Selftest tests, and adjusting the hard disk's AAM (noise management), APM (power management) and other parameters.

Hard disk detection and repair tool installation steps

​ ​ 1. First download the hard drive detection and repair tool software package from this site and obtain the zip format compressed package

​​ 2. Right-click the hard disk detection and repair tool zip format compressed package, select to extract to the current folder, and get the exe installation file

3. Double-click the decompressed exe installation file to enter the hard disk detection and repair tool installation interface, click Next

​ 4. Enter the installation location selection interface. You can choose to install to the C drive by default or click Browse to select another installation location.

5. Enter the installation interface and wait patiently for the installation and reading to be completed.

​​ 6. The hard disk detection and repair tool is installed, click Finish to use it

      Installation summary:First, download the software installation package of Hard Drive Detection and Repair Tool Master from this site, unzip it, open the exe file, and enter the installation wizard. Follow the steps to install according to the prompts. During installation, you can choose the default installation location or customize the installation location. After checking the corresponding shortcut, enter the installation program. After a short wait, the installation will be completed and enjoy this software.

How to use the hard drive detection and repair tool

​ ​ 1. After downloading and installing the hard disk detection and repair tool software on this site, open it and enter the main interface of the software. You can see that there are many functions

​​ 2. If your hard disk files are accidentally deleted, then click the Accidentally Deleted Files option

3. Select the address where the files and directories to be recovered are located, and click Next

​​ 4. The hard disk detection and repair tool will automatically search for deleted software. After completion, you can find accidentally deleted files for recovery. You can also interrupt the scan and end the search.

Frequently Asked Questions about Hard Drive Detection and Repair Tool

      Hard drive bad sector detection and repair methods

      1. Symptoms of bad sectors on the hard disk

a. When reading a certain file or running a certain program, the hard disk repeatedly reads the disk and makes errors, prompting information such as file damage, or it may take a long time to succeed; sometimes a blue screen may even appear, etc.

b. Every time the system is turned on, Scandisk will automatically run to scan for disk errors.

c. When the housekeeper performs a garbage scan, it will be found that the size of a certain type of garbage is abnormal (for example, it obviously exceeds the hard disk size)

If the above situation occurs, it means that your hard disk may have bad sectors.

We usually divide bad sectors into "logical bad sectors" and "physical bad sectors". The former are soft bad sectors, which are usually caused by improper use or operation of software and have little impact on the hard disk. They can be repaired by themselves through some tools and software or formatting. The latter is a real physical bad sector, which indicates that physical damage has occurred on the tracks of your hard disk and cannot be repaired by software. Moreover, the physical bad sectors are "contagious" and spread to the surroundings, putting the data stored near the bad sectors at risk. In this case, we need to "isolate" the bad sectors as soon as possible, that is, change the hard disk partition, hide the bad sectors, and at the same time do a backup job quickly to avoid the loss of valuable data. If you can't figure it out yourself, it's recommended to find a professional to solve it.

      2. If we have these "symptoms", how do we diagnose whether it is bad sectors on the hard disk?

​​ 1. We can use the simplest method, that is, the chkdsk tool that comes with Windows to diagnose whether there are bad sectors on the hard disk. So where is this chkdsk tool?

​​ 2. Open Run (shortcut key file:///C:/Users/ashhuang/AppData/Local/Temp/msohtmlclip1/01/clip_image004.gif+R), enter cmd.exe to open the command prompt, and enter parameters such as CHKDSK C:/F

3. The C in C: is the partition drive letter you need to detect. If you only enter CHKDSK, the current system disk status will be displayed.

4. If there are files in use on the disk before performing the test, the following prompt will appear, which means that the test cannot be performed this time. Select Y to perform the test the next time you turn on the computer.

5. If there are no files in use, you can perform detection and will tell you whether there are file system errors and the size of bad sectors in the corresponding places. As shown below:

      3. If there are bad sectors or system file errors, you can also try to repair them with the system's own tools:

a. The first thing we have to do is double-click on the desktop to open My Computer, then select the drive letter to be checked, right-click, and select the Properties option, as shown in the figure:

b. In the opened properties window, we switch to the Tools tab, as shown in the figure:

c. Click the Start Check button to open the check tool. We check Automatically correct file system errors, and check Scan and try to recover bad sectors. After selecting, click the OK button, as shown in the figure:

Comparison of similar software for hard drive detection and repair tools

a.HD Tune

      HD TuneThis very popular software in China, like other commonly used hard disk detection software, has a Chinese version for domestic users. The software will provide detailed information about each hard disk in the system, such as supported functions and technical standards, and evaluate how to improve the performance of the hard disk from many aspects.

b.HDDlife Pro

HDDlife Pro is a professional hard disk monitoring tool. It is different from general hard disk monitoring software. What it monitors is not the capacity change of the hard disk, but the health status of the hard disk.

c.Fujitsu Diagnostics (IDE)

The hard drive bad sector detection tool can quickly check whether the hard drive is damaged and supports S.M.A.R.T. data detection.

d.Norton Disk Doctor

An excellent disk detection and repair tool that safely and easily diagnoses and repairs various disk failures, repairs logical errors, bad sectors, and missing clusters on hard drives and removable storage devices, and checks every item from the disk's partition table to the physical surface.

These softwares are all very useful hard drive detection and repair tools. Each has its own characteristics and can help users repair their hard drive. Users in need should download it quickly.

Hard drive detection and repair tool update log

​​ 1. Bug fixed

2. The hard disk detection and repair tool has added new functions