Android one-click flash assistant

Android One-Click Flash Assistant is the first work launched by the Android Online team. Android One-Click Flash Assistant truly realizes one-click worry-free installation and one-click operation fast experience. It can perform a variety of originally complex flash operations such as one-click flashing, one-click rooting, and one-click unlocking. Even novices can operate it easily. Android one-click flashing assistant supports HTC, Samsung, MOTO, Sony Ericsson, Huawei, Lenovo and other Android phones. The one-click flashing tool makes Android flashing easier and safer, and you can flash it back at any time with one click.

Features of Android one-click flash assistant

      One-click drive

One-click operation allows novices to install mobile phone systems

Connect your phone and get started immediately

      One-click backup

Back up the entire system with one click to minimize risks

At any time, refresh with one click

      One-click flashing

​​Provide optimal firmware resources and fully automatic system installation

​​Easy, efficient installation

      One-click restore

One-click operation allows novices to install mobile phone systems

Connect your phone and get started immediately

Android one-click flash assistant flashing process

​ ​ 1. Run the Android one-click flash assistant, turn on the debugging mode (turn on the USB debugging mode), and then connect it to the computer with a USB data cable. When the phone screen appears on the Flash Master interface, or the phone's information is displayed on the right, it means the connection is successful.

​​ 2. Click the one-click flash button to enter the one-click flash function interface

3. Click the [Browse] button and select the ROM file we just downloaded to your computer.

​​ 4. Click the [One-click Flashing] button to enter the automatic flashing process. The flashing master will bring you a fully automatic flashing experience!

5. After entering the one-click flashing, it will go through several processes: SD card detection, ROM security check, ROM push to SD card, and recovery environment installation. We need to wait patiently!

​​ 6. After completing the above steps, the phone will restart and then enter the automatic flashing mode. The automatic flashing will take some time. We will wait patiently for the flashing to complete!

​ 7. After the automatic flashing on the mobile phone is completed, restart again. After this restart, you will enter the new system. At the same time, we can also see the prompt "Congratulations on the successful flashing" on the flashing master!

Frequently Asked Questions about Android One-Click Flash Assistant

How to turn on USB debugging mode?

​ ​ 1) Press the "Menu" button on your mobile phone and select "Setting" in the pop-up menu;

​​ 2) Select "Applications";

​​ 3) Check "Unknown Sources" on this interface, and then select "Develop";

​​ 4) Check "USB debugging" and "Stay awake".

How to flash the phone when it only displays the startup screen?

If the phone cannot enter the system and stays on the boot interface, it means that the flash failed. Please flash the official rescue package online.

1. The pace of optimization never stops!

2. More little surprises are waiting for you to discover~