Maybe you don’t have much contact with prime95. Today I will share with you some detailed tutorials on the Prime95 test project. For new users of prime95 who don’t know about it, just follow the editor to take a look at the detailed content below!

Double-click to open it for the first time, a dialog box will appear, then click "just stress test", then select blend (the third item), then click OK, and start running for half an hour.

If there is no problem for 1 minute, basically running simple applications such as pi will be fine.

5 minutes is no problem, you can basically pass 3dmark

No problem in 15 minutes, most test software can basically run

No problem for 30 minutes, almost enough for daily use

5-8 hours is no problem, basically all test software can pass. to

On the basis of the above +0.05V voltage, slightly reduce the frequency of 20Mhz, which is generally a frequency that ensures stable and long-term application.

According to the detailed tutorial method of prime95 explained to you above, have you learned it all?