Prime95 software introduction
There are similar places in Prime95 and Super π, which uses constantly calculating functions to achieve the stability of the test system. However, the test environment of Prime95 is very harsh. Even if it can pass the 4.19 million testing systems in SUPER π, it may not be able to spend a few minutes in Prime95. Many players use Prime95 to test the stability of the CPU after overclocking, and use it as the basis for the success of overclocking. The PRIME95 test has attracted much attention from players because of its stability problems that can be found in other testing procedures, and has been used by many professional computer OEM manufacturers to determine the stability of the computer.
Prime95 installation step
1. First download the PRIME95 software package from this site to get the ZIP format compression package
2. Right -click the mouse click the compressed package and select to decompress to the current folder to get the Prime95 folder
3. After opening the folder, there will be 32 and 64 -bit options. Open the corresponding folder according to the system of your computer system
4. After opening the corresponding folder, get the EXE file. After double -clicking, you can use the Prime95 software.
How to use prime95
How to use Prime95 to test CPU stability?
Prime95 download contains 32 -bit and 64 -bit versions,32 -bit uses 32 -bit, 64 -bit, 64 -bit,
First, the software name of the CPU stable software to be used here is called "Prime95". This is a free green software. Download this site and decompress it to the computer and run directly. After decompression, enter the software directory and run "Prime95" directly to execute files, as shown in the figure:
2. When used for the first time, the PRIME95 software pops up a selection dialog box. Select "Just Stress Testing" here, as shown in the figure:
3. In the test options, select the first item, and other settings remain unchanged. This item is mainly used to test the floating -point operation of the CPU, and it will also fill the CPU cache test. After selecting, click the "OK" button, as shown in the figure:
Fourth, the Prime95 software will automatically test the current computer CPU. The CPU of my current computer is a quad-core, so you will see "Work #1-4". Each work area indicates a logical CPU core, as shown in the figure:
5. Then you can open the system's task manager. In the performance list, you can see that the utilization rate of the CPU will be very high, as shown in the figure:
6. Under normal circumstances, the test time is 6 to 24 hours. If the CPU really has a hardware performance problem, abnormalities may occur in a few minutes, such as crashes, restarting, automatic power outage, etc. When we test the CPU pressure test, because the CPU utilization rate has been processed at a high load, the temperature of the CPU will increase. If the CPU fan does not heat the heat, it may cause automatic power off.
7. If you want to stop the test, click "Test-> STOP" in the menu bar in the upper left corner of the software, and then click the "OK" button to stop all tests, as shown in the figure:
PRIME95 Common questions
How long does the prime95 test be considered to be stable?
The prime95 testing time is less than 3 hours. There are two reasons: one is that the system that can be tested by the prime95 test of 3 hours is already very stable; the second is that running the prime95 test for too long may cause CPU damage. Because many components work during the PRIME95 test in large load conditions, such as CPUs, North Bridge, and motherboard power supply modules (especially the motherboard power supply modules that are directly exposed in the air). Therefore, we must do the heat dissipation of these components to prevent unexpected.
Prime95 andMaster Lucontrast
The green version of Master Lu has a professional and easy -to -use hardware detection. It is not only super accurate, but also provides you with Chinese manufacturer information, so that your computer configuration is clear at a glance, and refuses to blindly blind. The green version of Master Lu is suitable for various brand table machines, laptop computers, DIY compatible machines, real -time key components monitoring and early warning, comprehensive computer hardware information, effectively prevent hardware failure, so that your computer is avoided. There are hardware temperature monitoring and driver management, which bring you a more stable computer application experience.
PRIME95 is a software that specializes in the stable testing system, which is recognized as the most cruel one among all copying software. It loads a bit out of load on the CPU to test the capacity of the CPU. This test has attracted much attention from players because it can find that other testing programs cannot be found, and have been used by many professional computer OEM manufacturers to determine the stability of the computer.
The two models of Prime95 and Master Lu are software that helps users detect computers. Master Lu's functions are more comprehensive and the detection is relatively stable. Prime95 is more professional, and the detection is more cruel. Users can download and use according to their own needs.
Prime95 update log
1: Optimize performance
2: Solve the bug problem, we are serious
Xiaobian of Hua Jun:
Looking at it, the Internet that is similar to this software is everywhere. If you are not used to this Prime95 software, try itMaster LuAs well asCable Master (Commaster)As well asSISOFTWARE SANDRAAs well asWinbench99As well asCPU-ZWaiting for the software, I hope you can like it!
it works
it works
it works