How to install Windows 7 under PE using USB boot

We all know that we can reinstall the system directly using the hard disk, but if we need to repartition the computer, we need to format the hard disk under the PE system. Therefore, it is necessary to reinstall the system in the PE system. Today, the editor of Huajun brings you carefully selected content. I hope you will support and share it more. If you like it, hurry up and get it! .

1. Today's system images have integrated PE. After we directly enter the PE system, we click the "Ghost Backup and Restore" tool on the desktop and select "Manually Run Ghost". And enter the GHOST installation interface.

2. Follow the path: Local-->Partition-->From Image. Please be sure to choose the correct step in the following step, otherwise problems will occur, as shown in the figure:

3. In the interface below, select the computer drive letter through the inverted triangle at the top and find the GHO file you downloaded before. As shown below:

4. The drive letter here may not be consistent with the drive letter in your actual computer, so you need to look for it one by one. In addition, if you repartition directly, you can find your GHO file from your USB flash drive, provided that you have downloaded GHO and copied it to the USB flash drive.

5. After selecting your GHO file, click OPEN;

6. In the picture below, you need to choose which hard drive the system will be installed on. Be sure to see clearly which one is your own hard drive, which one is the external hard drive, which one is the USB flash drive, and don’t install it incorrectly;