How to defrost the Freezing Point Restore Wizard?

How to unfreeze Freezing Point Restore Wizard? Freezing Point Restore Wizard is a powerful system restoration software. When we use Freezing Point Restore, just one-click restart will restore the computer to its initial state (the state before Freezing Point was installed), but if we want to modify the computer or install When using some software, you must stop the Freeze Point software, that is, to thaw the computer. Since there is a saying of thawing a computer, there must also be a saying of freezing. Benzhu mainly talks about how to defrost the Freeze Point Restore Wizard and how to use the Freeze Point Restore Wizard to freeze. So let us take a look at how to defrost the Freeze Point?

How to defrost the Freezing Point Restore Wizard?

1. Open the software, hold down shift and click on the ice point icon

Figure 1: Open the software

2. Enter the password. This password is the password we set during installation.

Figure 2: Enter password

3. Enter the software interface. If you want to defrost, we have two options. Choose how many times to restart. After filling in the number of restarts, the computer will automatically enter the frozen state. If you choose to defrost after startup, it will be permanently defrosted.

Figure 3: Select Unfreeze

4. After selecting the options, we click "Apply and Restart" to pop up the following dialog box, click OK.

Figure 4: Restart

5. The computer will then restart. After the restart, the Freeze Point icon in the computer will have a red X, which indicates that Freeze Point Restore has been defrosted.

Figure 5: Software icon