WCAD assisted design of power overhead lines

WCAD power overhead line auxiliary design is the flagship product of YagerSoft. The software starts from the practicality of the project and fully considers the habits of the engineering personnel. It is a good helper for auxiliary design, a good think tank for construction, and a good partner for data management.

Function introduction

1. Mechanical calculation of overhead power line conductors;
2. Record the calculation conditions and main calculation process in the notepad;
3. Generate characteristic curve table and installation curve table in notepad;
4. Create characteristic curves, installation curves, and curve templates in the AutoCAD platform;
5. Realize longitudinal section tower positioning and setting out in the AutoCAD platform;
6. After positioning and laying out the lines, the position and tower model of the line tower can be adjusted;
7. Calculate the tensile section length, conductor length, representative span, and count tower models;
8. Determine whether the porcelain bottle is hanging upside down or the tower is pulled up, and verify the horizontal and vertical spacing of the tower;
9. Record positioning, setting out, pole position adjustment, and pole type adjustment in the notepad;
10. Manage meteorological conditions, conductor parameters and tower parameters.

Change log

v5.1.0: Internal algorithm adjustment