IP Setting Tool

The official version of IP Setting Tool is an excellent KEYENCE laser sensor IP setting tool. The latest version of IP Setting Tool has powerful functions and can be used to set or change the IP address. The IP Setting Tool software is convenient and easy to use and is suitable for connecting to Ethernet devices that support BOOTP can also set the IP address of EtherNet/IP devices that support BOOTP.

IP Setting Tool software features

1. Applicable to Ethernet devices connected to Ethernet and supporting BOOTP.

2. The official version of IP Setting Tool can set the IP address of EtherNet/IP devices that support BOOTP.

3. However, scanning of EthorNot/IP devices that have set IP addresses cannot be exempted.

IP Setting Tool function introduction

1. Select the packet capture network card. Zuolian also has some other packet capture conditions to choose from. If the selected network card does not support the "miscellaneous receiving function", the system will prompt the corresponding information. When this happens, you will not be able to obtain data that is not related to this network card. Data packets, in other words, you cannot obtain communication packets between other computers, so it is recommended that you replace the network card. Most of the network cards that do not support "miscellaneous receiving" are some wireless network cards and a few dedicated server/laptop network cards.

2. Protocol filtering

Normally, you can leave this option unchecked unless you are familiar with the protocol type.

3. Set up packet capture buffer

The guaranteed packet capture buffer size is 1M. If the network you want to track is large, you can increase this value appropriately. In addition, if the CPU processing power of the tracking host is insufficient, you also need to increase the buffer size; otherwise, loss may occur. package situation.

4. IP filtering

In IP filtering, you can set the IP addresses you want to capture packets or set the IP addresses you want to exclude and other information.

5. Port filtering

How to use IP Setting Tool

The official version of IP Setting Tool can be installed in Chinese or English. After installation, you can set the industrial Ethernet IP address.

When "Scan EtherNet/IP Devices" is executed, EthorNet/IP devices whose IP addresses have not been set will be searched.

EthorNot/IP devices with assigned IP addresses cannot be exempted from scanning.

IP Setting Tool update log

1. Fix bugs in the previous version

2. Optimize some functions