AutoCADHow to set up the classic mode in 2018? It’s actually very simple. The author will bring it to you below.AutoCADFriends who don’t know how to set up the classic mode in 2018 can learn it. I hope it will be helpful to everyone.
1. First, openAutoCAD2018, enter unsetAutoCAD2018The default operation interface of the classic interface (generally the default interface is "Sketch and Annotation").
2. InOperationFind the following menu in the upper left corner of the interface and click it, then click to display the menu bar menu. Make sure that the status is hidden after the settings are completed.menubar.
3. Click to open the Tools menu, click Options Panel, and then click Ribbon (B) to close the Ribbon. After closing, the interface is as follows:
4. Click to open the tools menu and movemousePlace the cursor on the toolbar menu in turn.AutoCADmenu. Then click and check the standard bar, style bar, layer bar, property bar, drawing bar, modification bar, and drawing order bar (this check operation can only select one at a time, just repeat it). After the setting is completed, the unsaved AutoCAD2018 classic interface is displayed.
5. After setting the required content for the classic interface, find the operation menu bar at the bottom of the interface to switch workspaces. Click to check Save current workspace as menu bar.
6. Save the current workspace asAutoCADClassic, here you need to manually enter "AutoCAD Classic" and click Save.
7. After setting upAutoCADThe classic interface is saved like this. You can see that there is an extra column in the menu bar when switching workspaces. "AutoCADClassic". That is, the operation of setting the classic interface is completed. After that, the operation interface after opening AutoCAD2018 will default toAutoCAD2018 classic interface.
The above is what the author broughtAutoCAD2018For the method of setting up the classic mode, friends in need can read this article.
