Forklift safety management system

Forklift safety management systemIt refers to the content produced to standardize the safe operation of forklifts, and stipulates the safety requirements for forklift management and operation. The free version of the forklift safety management system is provided by Huajun Software Park for free download. The source file is in docx format, which is convenient for users to edit by themselves. For more information about the forklift safety management system, please pay attention to Huajun Software Park for free downloads.

Forklift safety management system content

​ 1. Vehicle safety requirements: It stipulates the guarantee of vehicle operation ability, vehicle stability requirements, vehicle protection requirements and protection device requirements, as well as lighting, speed and distance requirements, battery replacement requirements, etc.

2. Operator requirements: stipulates the safety protection and operating requirements of the driver.

3. Operation area management requirements: It stipulates that operation guardrails or cone-shaped traffic signs should be set up in the operation area to separate the operation area and various operation environments.

4. Operation requirements for destacking and stacking: The operation requirements and steps for destacking and stacking are specified.

5. Vehicle inspection: stipulates the requirements and content of daily vehicle inspections, and stipulates that drivers are not allowed to repair or adjust the vehicle by themselves.

Forklift safety management system precautions

When starting the forklift, each start should not exceed 5 seconds. There should be an interval of more than 10 to 15 seconds between starts again. If the start fails three times in a row, another 5 minutes should be allowed.

Forklifts must travel in the "right up, left down" direction. Forklifts should slow down and sound the horn when entering or exiting the door.

When starting the forklift, pay attention to observe whether there are other vehicles, pedestrians or obstacles around you; when turning, observe the situation on the left and right sides, turn on the indicator light, drive slowly and sound the horn; when reversing, you should first look back to observe the situation, and only when there are no obstacles can you turn. travel.

You should drive slowly when going up or down slopes, and it is strictly forbidden to coast in neutral when going down slopes.

When driving, the fork should be 200-300mm away from the ground. It is not allowed to raise or lower the cargo while driving, and it is not allowed to brake suddenly or turn at high speed.

​ ​ Comply with the company’s speed limit regulations, the vehicle speed must not exceed 5km/h; high-speed driving is strictly prohibited to ensure safety.

It is strictly prohibited to drive overloaded, speeded and wide.

The editor recommends:

The forklift safety management system is a free template. You can download the source file for you to edit, modify and replace. Huajun Software Park also providesWarehouse management measures,Domestic waste classification management systemdownload.