How to make windows with sketchup master - How to make windows with sketchup master

Time: 2022-10-10Source: Huajun Software TutorialAuthor: Xiaoxin

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​…

Step 1: Click sketchup to enter the homepage and select the window that needs to be operated (as shown in the picture).


Step 2: Click on the window frame to set an inward offset of 100 mm (as shown in the picture).


Step 3: Click to select the center line of the inner window and connect (as shown in the picture).


Step 4: Set an offset data for each of the two small windows, set to 50 mm (as shown in the picture).


Step 5: Push and pull the outermost window frame outward by 100 mm, and push and pull the small inner window by 50 mm. You can add some color to the window (as shown in the picture).


The above is the entire content of how the sketchup master makes windows brought to you by the editor. I hope it can help you.

Related articles更多>>

Popular recommendations