What should I do if the online brushing fails?
1. The connection is unstable:
When flashing fails, it is recommended that the first step you take is to replace the data cable and USB connector. It is best not to make the data cable too long, because too long a data cable can easily cause signal attenuation and unstable transmission. Poor quality of the data cable can also cause file transfer failure;
In addition, it is recommended that you use the USB interface at the back of the computer case when flashing, because the computer USB interface often suffers from insufficient power supply, which will also cause the flashing to fail. Generally speaking, the USB interface at the back of the case will be more stable.
Note: It is best to use the original data cable to flash the Redmi Note Mobile Enhanced Edition (3G), otherwise it will easily fail.
2. The ROM package does not match the model:
You can open the battery back cover to check the specific model, and select the package corresponding to the model to flash the phone.
3. The firmware version of the selected package is too low:
It is the legendary flashing downgrade, which can easily lead to flashing failure.
4. If the above methods cannot solve the problem of flashing failure, it is recommended that you go to a specialized mobile phone repair shop to find professionals to help you flash your phone.
That's itOnline brush treasureSolutions to flashing failure, moreOnline brush treasurePlease go to the software related tutorialsHuajun Software Park software tutorial area!
