AFTool

The latest version of AFTool is a multi-functional vivo official online flash tool. The official version of AFTool supports many flashing functions, covering MTK mobile phone upgrades, Qualcomm mobile phone upgrades, AT command tools, additional upgrades and other functions. The latest version of AFTool can automatically certify computers and supports the latest model NEX version. Users need to pay attention to check whether the selected software and machine match.

AFTool function introduction

​​ 1. AFTool provides multiple flash setting interfaces, which can upgrade Qualcomm mobile phones. You need to add the upgrade content.

2. Support upgrade through fastboot-9008 flash mode and find the upgrade package you have downloaded to your computer.

3. Support x510 (PD1225) type upgrade mode

​​ 4. It is also possible to upgrade without detecting MD5

5. Use AFTool to help you upgrade your smartphone

​​ 6. You can find multiple auxiliary tools in the software to support SDA diagnosis

​​ 7. Support checking operators and VIVO mobile phone types

8. Can display factory barcode: status: existing barcode: status

9. It can also display your current mobile phone version

AFTool installation instructions

If the AFTool tool does not respond after plugging in the phone, please check the "3. Upgrade Tool Driver Installation" section and check whether third-party mobile assistant software is installed on the computer, such as 360 Mobile Assistant, these software will cause the port to be occupied, uninstall it before flashing.

During the upgrade process, when encountering problems, the tool may pop up some prompt boxes. When encountering such prompt boxes, in addition to following the prompts to take screenshots and save logs, you can also handle most problems by yourself. The following are some common situations for reference only: (Please pay attention to the content of the error prompt box and read it with caution)

1. After plugging in the mobile phone, the mobile phone enters charging or does not respond. The pop-up prompt boxes such as: S_BROM_CMD_STARTCMD_FAIL, S_BROM_CMD_STARTCMD_TIMEOUT, etc. are basically caused by not catching the port. Just try the connection again (if this problem occurs multiple times, you can Try changing the data cable or port, and check if there is a problem with the phone's USB port)

​ ​ 2. After plugging in the mobile phone, just after running the red bar, if an error message such as S_CHIP_TYPE_NOT_MATCH, S_UNKNOWN_TARGET_BBCHIP, S_BROM_BBCHIP_HW_VER_INCORRECT pops up, it is usually caused by the selected software not matching the inserted mobile phone, or the tool used does not support programming the machine. Please use the new version of the tool and check whether the software and machine match.

​​ 3. Errors such as S_FT_ENABLE_DRAM_FAIL and S_FT_DOWNLOAD_FAIL occur during the programming process. The reasons are complicated (wrong software selection, insufficient power supply, hardware damage, problems with mobile phone connection, etc.), but most of them are recoverable. Just follow the steps below.

AFTool Precautions

(1) Determine whether the official version of AFTool is a new version;

(2) Check whether the selected software and machine match;

After confirming the above two steps, you can restart the tool and try to program again.

If the problem still occurs, continue with the following steps

(3) If you are programming with a battery, you can select "With power supply" in the "Connection" item of the option;

(4) Check whether the USB cable and the USB port of the mobile phone are ok;

(5) Charge first and then program;

AFTool update log

​​ 1.Fix several bugs;

​ 2. Optimize detailed issues;

Special instructions:

Hello, the software you are about to use is an auxiliary tool and may be intercepted and checked by major anti-virus software. There may be risks in using this software. Please pay attention to avoid it. If you want to continue using it, it is recommended to close various anti-virus software before using it. .

Attached is the software package decompression password: softwaredownload4.com