Hongji 4750 wireless network card driver

The official version of the Hongji 4750 wireless network card driver is a network card driver specially created for the Hongji 4750 notebook. If the machine cannot use the Atheros wireless driver, the user can install the macro -based 4750 wireless network card driver to solve it. Hongji 4750 wireless network card driver is most suitable for Acer laptop at the beginning of the 4750G model, supporting three systems: WinXP/Win7/Win8.

Hongji 4750 wireless network card introduction

The change notebook is aspire The successor of the 4741G, the Acer 4741 series and the 4750 series have always been loved by notebook users with ultra -high cost performance and excellent workmanship. In early 2011, accompanied by this Intel Sandy The release of the Bridge processor, Acer released this Aspire 4750G. Aspire 4750G uses a new HM65 chipset, Intel Core's second -generation processor (including the second -generation i3, i5, i7 processor) and NVIDIA GeForce GT540M independent graphics card with 1G independent video memory. 2GB The memory of DDR3 is slightly insufficient. Fortunately, it can be easily upgraded in the future (there are two memory slots inside), and the hard disk capacity is 500g (5400 rpm). The machine is also equipped with a USB3.0 interface and two USB2.0 interfaces, pre -installed Windows 7 family ordinary version operating system.

Hongji 4750 wireless network card driver parameter introduction

Wireless network card chip A: Atheros AR9287 Wireless Network Adapter

WinXP driver version: 07/24/2012,10.0.0.75

Win7/8 driver version: 07/24/2012,10.0.0.75

Hardware ID: PCIVEN_168C & DEV_002E & Subsys_23091A32 & Rev_01

Wireless network card chip B: Broadcom 802.11n network adapter

WinXP driver version: 02/14/2011, 5.100.235.19

Win7 driver version: 02/15/2011, 5.100.235.19

Win8 driver version: 06/27/2012, 6.30.59.20

Hardware ID: PCIVEN_14E4 & DEV_4358 & Subsys_E040105B & Rev_00

Hongji 4750 wireless network card driver installation instructions

The downloaded driver installation file is divided into automatic installation packages of "setup.exe" and manual installation package of only INF file. The instructions are as follows

1) Automatically install the package, directly run the setup.exe in the compressed package to complete the installation, install the driver first and then connect the device.

Features: Simple, with the corresponding management software, the control panel can be added and deleted.

2) Manually install the package, unzip the downloaded driver to the folder, and then select the device that needs to be installed in the device manager, select the update driver-install from the specified location-browse the folder of the decompression to complete the installation. For a detailed tutorial, click to view the manual update driver.

Features: precise, convenient, no junk files. (You can accurately judge the driver by hardware ID)

Hongji 4750 wireless network card driver update log

1. Fix the bug, the new version experience is better

2. Change some pages