How to upgrade Firefly Assault Base - Firefly Assault Base upgrade guide

Many people don’t know how to upgrade the Fireflies Assault Base? The article brought to you today is the upgrade guide for the Fireflies Assault Base. If you still don’t know, come and learn it with the editor.

Props that need to be kept for base upgrades and characters in the early stage——

At the beginning, you need a pair of blue-handled pliers and a tape measure to open the metal workbench.

Don't worry about modifying station 3. You need metalworking 4, security 3, 5 warehouse 9 U disks (brushed in the Akiyama map computer room) and 2 civilian first aid kits (Heidi around level 11) to hand in the task. Note that the three U disks need to be handed in. Two are to be placed in designated locations.

Qiu Shantu took the USB flash drive when he saw it, until he handed over 3 USB flash drives to Heidi to complete the task. There will be several tasks to put USB flash drives in the later period, and two of them are always ready in the warehouse.

Grab the markers if you have them. You will need about 9 markers for the early tasks, so just keep 5 markers in the warehouse.

It is not cost-effective to sell some items directly to the store, so it is better to search the market price, for example, there is a huge difference in the price of CPU, and the drone mission is very far, so it is possible to sell them after they are obtained in the early stage.

In addition, some items can be rubbed. For example, a special scalpel is used to rub M4 6 bullets, while ordinary scalpels and scissors are used to make special scalpels.

The required props are roughly arranged in the order in which the mission is received - (after the mission, this thing is basically useless)

All tasks have a gun sent by the NPC, and there are subsequent transformation and killing the enemy's mission.

Claw hammer (available in factory Akiyama) opens warehouse level 3. There are 7 levels 3 and 4 in total. Among them, 1 will be given before and after level 8 Heidi investigates the underground of the factory.

did not do anything but a P-6 optical sight. The AK103 is the first task to modify the gun. As long as the AK103 has a rail sight and the grip and magazine are removed, it will be fine.

The insulation wires are opened at level 4, and there are 5 spaces in the back.

The lighter and the U.S. Gong knife opened the Golden Grade 2 level. The art knife needs a dozen in the early stage.

need a lot of metal wire to upgrade and modify the bench

Small diamond ring trading center opened

2 electric screwdrivers and 3 screws to open the shooting range

T3 Armor 2-piece mission requires pliers and multi-function charging cable

7 electric drills and 7 multi-function charging cables upgraded warehouse

5 electric drills open the arsenal

Keep a few ruby rings and don’t sell them first

Keep the durability of the factory key and the marker factory to place the marking task. The marking device is an escape point in the factory. Similarly, the cable car parts of the Akiyama map are also required. In addition, the markers are often needed for seasonal tasks, and five of them are always available for consignment. in the warehouse.

After completing the Akiyama series of tasks, you are required to hand over 2 standard first aid kits

The signal jammer is needed for later missions, leaving four

There are 2 tasks left for civilian first aid kits, and the same is true for standard first aid kits.

CPU fan and CPU open the modification platform level 4

The metal scissors are on the box at the entrance of the Akiyama hangar.

Hydraulic shears in two parts warehouses

The scalpel is at the Fisheries Association

Firefly Assault System Requirements

Operating system: Windows7SP1, Windows8.1, Windows10

CPU: Intel Core 2 Quad 2.4GHz, AMD Phenom X3 2.1Ghz

Memory: 4 GB RAM

Graphics card: 512MB NVIDIA 8600, 512MB ATI 387