H3C Network Device Simulator (HCL)

H3C Network Device Simulator (HCL)The official version is a network device simulation tool built for the network. The official version of H3C Network Device Simulator (HCL) will provide users with simulation settings for multiple types of devices, and users can also simulate these network devices on their computers. andH3C Network Device Simulator (HCL)Users can also help users with virtual networking, configuration, debugging and other functions. Huajun Software Park provides download services for H3C Network Equipment Simulator (HCL) software. Everyone is welcome to download and use it!

H3C Network Device Simulator (HCL) Frequently Asked Questions

      Question: H3C network device simulator (HCL) Why does the port go down as soon as I capture the packet?

Answer: This is a software BUG. If the promiscuous mode is set and the network card cannot handle it, it will be automatically protected.

      Question: Why does it prompt that packet cannot be captured when using H3C Network Device Simulator (HCL)?

Answer: First of all, is wireshare installed on your computer? When installing wireshare, you need to install the wincap component. Is your component consistent with the one installed by your emulator?

      Q: How to uninstall H3C Network Device Simulator (HCL) software?

Answer: Method 1: Install and open the computer manager software, select the software management option, click the uninstall option, find the H3C Network Device Simulator (HCL) software in the list, and click uninstall.

Method 2: Install and open 360 Software Manager, find the H3C Network Device Simulator (HCL) software in the list of uninstall options, and click to uninstall.

How to use H3C Network Device Simulator (HCL)

How to configure telnet remote login in h3c emulator?

Open the downloaded software and the following interface will appear.

This case requires adding 2 routing devices. You may need to wait a while when adding a second device, depending on your personal PC.

After the device is added successfully, it will be displayed in gray. At this time, we need to add the connection cable of the device. The types of wires and their connection methods are shown in the pictures.

Start the device and display the interface. It is possible that if the first startup fails, the software that takes up memory will be closed. Just start it again.

​ ​Double-click the device to enter the character interface for settings. Press the ctrl+d key combination to enter the system, and then press Enter several times.

Type the code on the picture. The red words are the explanation of the code to help you understand. You will see that some of them are one letter or several letters. This is using the automatic completion function, which can save a lot of time and improve efficiency. For example, if I want to call telnet, I can just call te and press the TAB key, and the system will automatically complete the correct command on the next line. But the premise is that you are in the correct view mode, so be sure to ensure the correctness of the view mode.

At this point, we have completed configuring the first device. Start the second device, use the same method, double-click the icon to enter the character interface. Press ctrl+d to enter the system and press Enter several times to start configuration. telnet 1.1.1.1 Start connecting to the other party.

H3C Network Device Simulator (HCL) software functions

​​ 1. It can help users simulate switch construction, configure equipment operating environment, and construct network data equipment configuration information

2. Support device selection. The software provides a variety of network configuration models. You can freely add the devices required for configuration on the software. It supports MSR36 devices and Host devices.

3. Supports the data transmission function of the simulated port. When you configure the server, you can use the simulation function to check whether the network environment you configured can operate normally.

​​ 4. Support networking between virtual devices on the same PC, realize cross-PC networking through the remote virtual network agent Remote, and realize networking between virtual devices and the host through the local host Host

5. Connect the device. The software's connection function is still very smart. Click on different devices, choose to use the port topology to connect, select your network setting name and click to connect.

6. The device name cannot be modified when the router or switch device is running. The device name supports up to 20 characters, and excess characters will be blocked. Therefore, you need to clearly check the working status of the device when configuring the switch.

H3C Network Device Simulator (HCL) software features

      信息反馈中的主题增加了长度限制提示信息。

After the user successfully logs in, the personal center control is highlighted.

​​Optimized the information prompts on the online upgrade function page.

                                                                                      Added right-click dragging function on the main interface.

                  Added the function that the rectangle in the main interface can be resized by dragging the corners.

New private messages received have been added with the function of being opened directly.

The maximum number of supported devices has been increased from 30 to 50.

                Added automatic login and logout functions.

                                      Added automatic version update function.

Applicable objects of H3C Network Device Simulator (HCL)

The applicable objects of H3C simulator include:

​​​Learners of network technology;

Those who are preparing to take the H3CNE/H3CSE/H3CTE/H3CIE study and examination;

Those who hope to be familiar with network equipment based on H3C's Comware V7 platform;

Engineers and technicians who need virtual environment testing and verification of configuration solutions;

        Others who are interested in network technology.

H3C Network Device Simulator (HCL) installation steps

​ ​ 1. Download the H3C Network Device Simulator (HCL) from the Huajun Software Park and extract it to the current folder. Click the HCL_7.1.59-Setup.exe application to enter the installation wizard interface, and then click Next.

​​ 2. Select the software installation location interface. Huajun editor recommends that users install it on the D drive, select the installation location and click Next.

3. The installation of H3C Network Device Simulator (HCL) is completed, click Finish.

Comparison of similar software

      NSME simulatorIt is a simple packet-level discrete event network simulator, mainly developed for friends who are interested in and need network application layer simulation research.

      Lightning simulatorIt is a powerful Android emulator with the fastest running speed among similar emulators. The lightning simulator uses the world's leading core technology to allow users to play mobile games on their computers and experience a more perfect gaming experience. Currently, the lightning simulator is compatible with all plug-ins on the market, allowing players to truly plug and play.