Don’t you know how to protect the Dashi USB control system? If you don’t know how, hurry up and learn the method of protecting the Dashi USB control system brought by the editor. I hope that by studying this tutorial, it can help Everyone.
When using the Dashi USB control software, you selected "Allow data to be copied from the U disk to the computer, prohibit copying data from the computer to the U disk" and "Can copy data from the computer to the U disk, but the administrator password must be entered". After the two items, because your USB storage device will be put into a write-protected state by the software, once you exit or uninstall the software without restoring the use of the USB storage device, you may still be unable to write to your USB storage device. The storage device copies data and prompts the "write protected" status.
1. If you have not uninstalled the Dashi USB disabling software, but the trial time is up, and then because the program will exit, you need to install it under the installation path (default is C:Program FilesDszusbmonitor) double-click to start "Dszmonitor.exe" again, and then you can restart the Dashi to USB interface shielding software, then insert your U disk at the same time, and then click "Recover USB storage devices, mobile phones and "Using Bluetooth..." This option can cancel the USB flash drive write protection and disable the USB flash drive write protection function.
2. If you have uninstalled the Dashi to disable computer U port software, you need to install Dashi to disable microcomputer U port software, then insert your U disk again, and click "Restore the use of USB storage devices, mobile phones and Bluetooth... …” This option is sufficient.
The above is the method brought by the editor to protect the USB control system. Friends in need should not miss it.
