How does CorelDRAW9 convert files to curves? This chapter mainly introduces the operation process of CorelDRAW9 to convert files into curves. Friends who don’t know how to operate it can follow the editor to learn. I hope it will be helpful to you.
1. Install the virtual sound card driver Virtual Audio Cable software
2. Right-click the volume control icon in the lower right corner of the computer, and set Line1 (Virtual Audio Cable) as the default device in both Recording Devices and Playback Devices.
3. After setting up this way, you will not hear any sound when opening an audio file. This is because the sound has been transferred to the virtual line. Next step
4. Open Audio Repeater in Virtual Audio Cable
5. Make settings: Set Wave in to Line1 (Virtual Audio Cable) and Wave out to a sound output device, such as a speaker, and then click Start
6. After Start, don’t touch the Virtual Audio Cable anymore. Keep it minimized, then open the recording software or screen recording expert, set the parameters and start recording.
7. After the recording is completed, the virtual sound card driver Virtual Audio Cable can be turned off. If you want to hear the audio, just set the volume control icon back to the original microphone and speaker. If you need to record, repeat steps 2-4.
The above is the tutorial on how to use the virtual sound card driver Virtual Audio Cable brought to you by the editor. Let’s learn it together. I believe it can help some new users.
