Will the USB flash drive not be repaired during the operation of SanDisk RescuePRO? Today, the author will explain how to use SanDisk RescuePRO to repair U disk. I believe that by studying this tutorial, everyone will know more about SanDisk RescuePRO software!
1. If you don’t use the U disk for a long time, and after inserting it into the computer, you find that it cannot be recognized and fails to read. If you check the computer interface and the USB interface is OK, what should you do? At this time, we are thinking of mass production operations. If we choose this method to repair, we need to determine the main control chip solution first. Finally, after testing with ChipGenius software, we found that the main control solution still cannot be recognized. Don’t worry, follow the editor below. operate.
2. Confirm that you have downloaded and installed SanDisk RescuePRO, the U disk repair tool, and then use DiskGenius to test the U disk and find that it can be recognized normally and the capacity is correct.
3. Return to the DiskGenius interface, right-click the USB disk icon to open the menu of the DiskGenius software.
4. In this current interface, we start to clear the sector data of the U disk. After the cleaning is completed, re-insert the U disk. After formatting the U disk, it can be used normally. .
The above is the method that the editor explains to you how to repair a USB flash drive using the SanDisk RescuePRO tool. Let’s learn it together. I believe it can help some new users.
