How to make dials in flash8? Today I will share how to make dials in flash8. If you are in need, please learn with me.
First, create a new flash8 document on your computer; click the "Line" tool and draw a horizontal straight line on the document; the line width is 135;
Then, click the "Select" tool to select the straight line. In the "Alignment" panel, press the "Relative to Stage" button; then click the "Horizontal Centered Distribution" and "Vertical Center Alignment" icons respectively; set the line to be centered relative to the stage;
Then, click the "Ellipse" tool in the toolbox; and set the "Fill Color" here to no color;
Then, draw a perfect circle with a width and height of 115 in the document; use the "Select" tool to select the circle, and then, in the "Alignment" panel, press the "Relative to Stage" button; then click the "Horizontal Centered Distribution" and "Vertical Centered Alignment" icons respectively; set the circle to be centered relative to the stage;
Now delete the circle and the straight line inside the circle; after deletion, two line segments remain; as shown in the picture; use the "Select" tool to select both line segments;
Click on the "Transformation" panel, set the "Rotation" to "6 degrees"; then click on the "Copy and Apply Transformation" button;
The two line segments are copied and then rotated 6 degrees, and the effect is as shown in the picture; repeatedly click the "Copy and Apply Transform" button, and the final effect is as shown in the picture;
Finally, if you want to make a clock dial, you can select the line in the punctual direction and thicken the line; then add the numbers. The dial is now completed.
The above is the method of making dials in flash8 brought by the editor. Friends in need should not miss this tutorial.
