PowerPCB is an excellent printed circuit board design software. PowerLogic 5.0 and PowerPCB 5.0 are excellent EDA design software launched by Mentor Graphics. They have become the best among many EDA design software and are deeply loved by users.
PowerPCB 5.0 installation
1. Select "Node-locked with FLEXid Key(teal)" during installation
2. When requesting a license, temporarily use pcblic.dat in the Crack directory instead.
3. Installation (you may have to restart your computer if you forgot)
4. Run setupx86.exe in the CRACKDongleFlexID WinNT directory (WIN2000, WINXP)
Or sentw9x.exe (WIN98) in the CRACKDongleFlexIDWin9x directory
Execute "Install Sentinel Driver" in the Functions directory
to get FLEXID7 as "7-12345678"
(There is also another one that can also be used)
5. Restart your computer
6. Enter the Dos command and run "PCBCrypt -h 7-12345678" in the crack directory
Generate license file with HOSTID=FLEXID=7-12345678: pcblic.dat
(You can also use another FLEXID7. For FLEXID7, you can use "Start"->
"PowerPCB with BlazeRouter5.0"->"Security"->
See the "System Setting" option of the "Licensing diagnostics" tool. )
7. Use pcblic.dat in the CRACK directory instead of the PowerPCB installation directory.
pcblic.dat in the SecurityLicenses directory
OK
PowerPCB and BlazeRouter can be started
================================================== =======
After running PowerPCB 5.0 CrackDongleFlexIDWinNTsetupx86.exe first, be sure to configure the Sentinel driver, then restart, and then run PCBCrypt.exe after startup. After generating license.dat, run PowerPCB 5.0 CrackDongleFlexIDWinNTsetupx86.exe again. This time, select Romove Sentinel Driver. Then restart the machine, install Powerpcb5.0 after startup, run PowerPCB 5.0 CrackDongleFlexIDWinNTsetupx86.exe after installation, and then select config Sentinel driver, then restart the machine, and it will be OK after startup.
it works
it works
it works