Settings introduction
Click the gear in the upper right corner to set the resolution, whether to save the video, and whether to turn on the barrage.
> 1. General settings
Whether to record, whether to view the barrage, etc. are all set here.
> 2. Audio settings
When the host has multiple recording or playback devices, you can select the audio device to use here.
> 3. Video settings
You can adjust the live video screen. The system will have recommended values by default to adapt to the live broadcast conditions of most anchors. Anchors with good network and machine conditions can customize the video parameters to suit their own live broadcast needs.
> 4. Live broadcast settings
Select options such as disconnection reconnection and line here.
> 5. Shortcut key settings
You can set shortcut keys during live broadcast here
> 6. Log
You can see Octopus TV version updates here
> 7. Barrage settings
You can set up the barrages during the live broadcast here
Network preparation
Hosts are requested to ensure that their minimum upload bandwidth is not less than 1Mbps (128KB/s). If your upload bandwidth is insufficient, you can contact your network operator to increase the bandwidth. It is recommended to use fiber optic lines from China Telecom and China Netcom, but not small operators (Changkuang, Aipu, China Mobile, China Railcom, etc.).
Step 1: Prepare to join the live broadcast
The live broadcast assistant supports the use of third-party accounts to log in. If you don’t have one, please register.
You can log in to the Live Assistant using the username and password you used when registering.
Step 2: Contact the staff to become an anchor
Submit an application in your personal center – I want to live broadcast page to obtain the qualification of anchor!
Step 3: Live broadcast room settings
In Personal Center – Live Broadcast Settings, you can set up your live broadcast room.
The following describes the editable parts:
1) Room title: It can be modified at any time. This title is the name of your room when the audience sees it.
2) Room announcement: The announcement will appear in the upper right corner of the live broadcast room. Briefly introduce and promote yourself!
3) Live broadcast details: Live broadcast details will appear below your live broadcast room player. Carefully writing the live broadcast details will help your audience get to know you quickly and leave a deep impression on everyone.
4) Personalized domain name: You can customize the non-ID number login URL. It is recommended to be simple and easy to remember. For the time being, you can only contact customer service to apply for activation.
5) Room settings: Manage the room managers and blocked kids in your room.
Use configuration
- CPU: E3-1230 v3 physical quad-core (virtual eight-core)
- Motherboard: ASUS B85 series
- Memory: 4G or more
- Graphics card: GTX650 2G video memory or AMD equivalent graphics card
- Hard drive: 500G or more
Instructions for use
-Capture full screen: Live broadcast the content of the entire screen. (This option is highly recommended)
-Interception area: For anchors who do not want to limit the live broadcast range to one window, they can intercept a range on the screen for playback, or they can directly double-click the mouse to live full screen.
-Selected window: Select a window and broadcast the content in the window
-Select a game: We also provide the function of live streaming games. Just click to select a game and select the running game.
General settings
Whether to record, whether to view the barrage, etc. are all set here.
Audio settings
When the host has multiple recording or playback devices, you can select the audio device to use here.
Video settings
You can adjust the live video screen. The system will have recommended values by default to adapt to the live broadcast conditions of most anchors. Anchors with good network and machine conditions can customize the video parameters to suit their own live broadcast needs.
Live broadcast settings
Select options such as disconnection reconnection and line here.
Quick settings
You can set shortcut keys during live broadcast here
Log settings
You can see the version update of Moyun TV here
Barrage settings
You can set up the barrages during the live broadcast here
FAQ
1: The camera cannot be started when using Moyun Live Assistant
1: Check whether the security software of your computer host (360, qq, Baidu, etc.) maliciously blocks or prevents the activation of the camera. If it is blocked, please exit the security software completely.
2: Check whether the connection between the host and the camera is successful. If the connection is unsuccessful, please try to connect other USB ports in series or repair the computer.
3: Check whether the camera you are using requires driver installation before it can be used. If you need to download the driver, please go to the download website provided in the camera product manual to install the camera driver and confirm that the installation is successful.
4: Check the transparency adjustment value bar in the camera settings page of Moyun Live Assistant and adjust the position. The closer to the right, the higher the transparency, and the far right represents full transparency. If the progress bar value is on the far right, please return it to the far left.
2: When using Moyun Live Assistant, the microphone cannot be started normally.
1: Check whether the connection between the microphone and the host is normal and whether it is connected to the corresponding slot (the 3.5 slot of the computer host has two slots for headphones and microphones). If there is no normal connection, please unplug the microphone connection plug and reinsert it into the corresponding microphone slot of the host.
2: Please check whether the security software such as 360, etc. blocks the microphone from being enabled. If so, please exit the security software completely.
3: Check whether the microphone you are using requires driver installation before it can be used. If you need to install a driver, please download and install the driver from the website provided in the microphone product manual, and confirm that the installation is successful.
4: Right-click the small speaker icon in the lower right corner of the desktop and click the recording device option to check whether the use of the microphone is disabled. If so, right-click to restore it. Are other microphones enabled (such as headphones, camera built-in microphones)? If enabled, please right-click to disable the corresponding device and select to enable the corresponding microphone.
Three: There is noise from the microphone and electromagnetic interference during the live broadcast.
1: Check the environment around the microphone. Mobile phones, tablets, decorations containing magnets, and other things that can cause electromagnetic interference to the microphone should be kept away from the microphone.
2: Right-click the small speaker option in the lower right corner of the screen, right-click the corresponding microphone and click the Properties option, and appropriately lower the volume bar of the microphone enhancement in its level option.
3: To ensure the quality of live broadcast, a sound card must be installed. An external sound card is installed on a laptop and a built-in sound card is installed on a desktop computer. Enable the sound card's noise reduction, suppression, ducking and other functions.
Four: The voice of the live broadcast commentary is too low and the audience cannot hear clearly.
1: Check the settings of Moyun Live Assistant, click the microphone-shaped button at the bottom of the Moyun Live Assistant login page and select to increase the microphone volume.
2: Right-click the small speaker button on the lower right side of the computer, right-click the enabled microphone, click the Properties function key, increase the microphone volume in the level function bar, and appropriately increase the microphone enhancement function.
3: Adjust through the microphone volume control function key of the sound card.
Five: During the live broadcast, some viewers reported that the recording screen appeared black or the live broadcast area was incomplete and uncoordinated.
1: The fastest and most effective solution is to click the interception area function key of Moyun Live Assistant to quickly re-capture the full screen and play the live broadcast in full screen.
Six: During the live broadcast, a large number of viewers reported lagging and unsmooth playback.
1: Check whether other applications that occupy network speed are open on the machine. Please completely close all programs, software and web pages except Moyun Live Assistant and video sources.
2: Check whether there are other devices using the same WIFI in the network environment. If so, you must turn off other devices and stop using them until the live broadcast ends.
3: Check whether the video playback source plays smoothly. If not, please change the playback source or playback line.
4: If you have tried multiple methods and are still stuck, please restart your computer and start the live broadcast again. If you are still stuck, please stop the live broadcast.
Seven: During the live broadcast, Moyun Live Assistant repeatedly disconnected and reconnected.
1: Please first confirm whether the network connection in your network environment is also the same. If so, please stop the live broadcast immediately and contact the network operator immediately to solve the problem as soon as possible. If not, please disconnect from the network, close Moyun Live Assistant, and then reconnect. If this situation still occurs, please uninstall Moyun Live Assistant, restart the computer, then re-download Moyun Live Assistant, and then start the live broadcast. If the problem is still not solved, please stop the live broadcast, and keep a screenshot of the problem with a detailed description and send it to the operation team personnel.
it works
it works
it works