- Green versionCheck
- Green versionCheck
- Green versionCheck
- Green versionCheck
Canon printer reset software software functions
It can solve the problem of the printer prompting that the ink count is full.
Any inkjet printer that prints to a certain amount will produce waste ink that will saturate the waste ink pad
You can connect the printer to the computer and run the software, then click Clear
Canon printer reset software installation steps
1. Download the Canon printer reset software in Huajun Software Park and get a softwareCompressed package.
2. Then compress the software packageUnzip, get the Canon Reset.exe in it.
3. Finally, double-click to open Canon Clear.exe and you can use it.
Canon printer reset software instructions
First, turn off the printer, load a few sheets of A4 copy paper into the printer, and then prepare the printer to enter maintenance status:
1. First press the <Stop/Reset> button, then press the <Power> button to turn on the phone (do not let go)
2. Wait for the printer to start up. When the power indicator light turns green, press and hold the <Power> button without letting go, and then release the <Stop/Reset> button.
3. Then press the <Stop/Reset> key 2 times. Then release the <Power> key and the <Stop/Reset> key at the same time. After startup is completed, the printer displays "0". (If it is not displayed as "0", please turn off the phone and follow step 1.2.3 again.)
4. The computer prompts to find new hardware and prompts to install the driver. Leave it alone. If no new hardware is found, it is recommended to restart the computer or try changing the computer. (If the computer cannot find the new hardware, the reset software cannot be used)
(1) Click the "EEPROM" button (if an error is displayed, such as 001 002, just click OK)
(2) Click the "Main" button to clear the waste ink counter (put a piece of paper on the printer and D=000.0 will be printed, indicating that the clearing is successful). The clearing software displays "A function was finished”
(3) Turn off the printer and restart it, and test the printer (if it cannot print, please check the ink monitor to see if there is lack of ink or other faults)
Things to note:
1. If your printer prompts "Printer parts have expired", "Error number: 5B00", "Waste ink collector is almost full" or "Waste ink collector is full" during use, it needs to be cleared. Please use this software.
2. Other problems including "foreign objects", "paper jam", "cannot recognize the ink cartridge", "lack of ink", "unclear printing", etc. have nothing to do with this reset software.
3. Waste ink clearing software 1.074 (applicable to Canon MP259/258/2780/328/276 printers and all-in-one printers, make sure it is an XP system)
4. Program Chinese and English "EEPROM" =Electrically Erasable Programmable Read-Only Memory Electronic erasable programmable read-only memory
Frequently Asked Questions about Canon Printer Resetting Software
Question: How does Canon printer reset software put the printer into repair status?
Answer: 1. Turn off the power of the printer. While pressing the "Continue/Cancel" key (some machines call it Stop/Reset), press and hold the "ON/OFF" key of the power supply;
2. When the power indicator light lights up green, press and hold the power "switch (ON/OFF)" button and release the "Continue/Cancel" button;
3. While holding down the power "ON/OFF" button, press the "continue/cancel" button 5 times, then release the power "switch (ON/OFF)" button and the "continue/cancel" button.
(Note: Only release the power “ON/OFF” button now, the power “ON/OFF” button was pressed in the first two steps)
[Each time you press the "Continue/Cancel" key, the alarm and power indicator lights will flash alternately, the alarm indicator light will be orange, the power indicator light will be green, and the alarm indicator light will start to flash]
4. When the power indicator light turns green, the printer is ready for maintenance mode operation (if it does not enter maintenance mode, please turn off the printer and restart it according to step 1.2.3)
5. The computer prompts to find new hardware and prompts to install the driver. Leave it alone. If the new hardware is not found, it is recommended to restart the computer or try changing the computer. (If the computer cannot find the new hardware, the reset software cannot be used)
Q: Why do Canon printers need to be reset?
Answer: For any inkjet printer, when printing to a certain amount, the waste ink produced will saturate the waste ink pad. After replacing the waste ink pad, the only way to tell the printer is to clear the waste ink counter.
Comparison of similar software
Epson epson r330 printer reset softwareThe latest version is a reset service tool created for Epson epson r330 printer. Epson epson The official version of r330 printer clearing software can quickly clean the waste ink counter, allowing you to print normally. And Epson epson The r330 printer clearing software can also clear the Epson r330 inkjet printer and lift the limit on the number of times the printer can print.
Canon mg2580 printer reset softwareThe official version is a clearing software specially launched for Canon MG2580 printer. The latest version of Canon mg2580 printer clearing software can solve the daily problem of full ink and waste ink, and help users clear the printer in time. When the user If the printer is full of waste ink and displays a 5B00 error, you can use the Canon mg2580 printer clearing software to clear it.
Huajun editor recommends:
Canon printer reset softwareIt can solve the problem of the printer prompting that the ink count is full. Any inkjet printer that prints to a certain amount will saturate the waste ink pad with waste ink. Canon printer reset software takes up little memory, has stable performance, is free of any bundles, is green and safe, and is truly a conscientious software!
it works
it works
it works