ADB driver installation method
When the phone is connected to the PC for the first time, the driver installation wizard will automatically pop up. If neither the ADB device nor the Found New Hardware dialog box pops up, enter the Device Manager----Universal Serial Bus and delete the following devices.
Then re-plug and unplug the phone to discover the new hardware.
1. Select "Install from a list or specified location" and click Next, as shown in the figure below:
2. Select "Don't search" and click Next, as shown below:
3. Select "Install from Disk..." as shown below:
4. Click the "Browse" button and select the path of the driver file (for example: D: K-Touch W808 DriverADB driver x86)
5. After the path selection is successful, click the "OK" button, as shown in the figure below:
6. Select K-Touch ADB Debug Interface and select "Next", as shown in the figure below:
7. Click the "Finish" button, that is, the driver installation is successful, as follows:
8. Check the "Device Manager" (open path: My Computer/Properties/Hardware/Device Manager), as shown in the figure below, that is, the ADB driver is successfully installed.
it works
it works
it works