Siemens plc simulation software installation steps
1. First download the Chinese version of the Siemens PLC simulation software package from this site. After the download is completed, you will get the compressed package in zip format. We right-click the compressed package and select Extract to the current folder in the pop-up menu bar to decompress the compressed file. come out.
2. After we decompress, we can get the two files S7_200.exe and S7_200 Chinese version .exe in the picture below. Both software are applications of Siemens plc simulation software and can be opened to enter the software. It's just that the interface opened by S7_200.exe is in English, while the S7_200 Chinese version.exe is in Chinese.
3. As shown in the figure below, we double-click to run the S7_200 Chinese version .exe, and you can directly enter the main interface of the software and start using it. No installation is required. You can see that the interface is all in Chinese. This is the Chinese version of the software, which can be convenient for you. use.
Siemens plc simulation software instructions
1. First, we need to use the S7-200 programming software to write the program we need. After the writing is completed, we can click the "File" option above the software interface, and then click the "Export" option in the drop-down menu bar to export our Export the written program to the location you specify on the computer. After everything is completed, we can get the .awl format file.
2. Next we can open the Siemens plcS7-200 simulation software downloaded from this site. We click the "Configuration" option at the top of the interface, and then click the "cup model" option in the drop-down option. What you need to pay attention to here is that you Just select the PLC model when writing the program.
3. After we have configured the PLC model with the simulation software, we next click on the "Program" option at the top of the interface, and then find the "Load Configuration" option in the drop-down menu bar, and then the file input dialog box will pop up. Window, we import the .awl file saved in the first step.
4. After we add the required files to the software, a prompt box will pop up, prompting "The file cannot open to read data", we just click OK.
5. Next, we can click the "View" option at the top of the interface, then click the "Status Table" option in the drop-down selection, and then the "Status Table" dialog box will pop up. We enter the address we need to view in the box and click "Start" " will display the current value of the corresponding address. Not only that, you can also modify the current value yourself, which is more convenient.
Frequently Asked Questions about Siemens PLC Simulation Software
How to communicate with PLC?
Connect the programming cable, plug the USB port side of the programming cable into the computer, and plug the DB interface into PORT0 or PORT1 of the PLC. Set the PLC's mode switch to STOP.
Set the PG/PC interface in the programming software, select PC/PPIcable (PPI), and set the communication interface to USB. After saving and closing the dialog box, return to the initial interface of the programming software, click Communication, search for all baud rates and double-click to refresh.
Siemens plc simulation software update log
1: Brand new interface, refreshing, simple and efficient
2: Performance is getting better and better
Huajun editor recommends:
Siemens plc simulation software (s7-200) is a green and safe software. The software has practical functions and is easy to operate. You can open and use its various functions without installation, which is very convenient. Friends in need can download and use it. This site also has Mitsubishi PLC simulation software, S7-200 PLC simulation software, and plc programming software (PzStar) for you to download!
it works
it works
it works