- Green versionCheck
- Green versionCheck
- Green versionCheck
- Green versionCheck
Four-way oki5560sc driver installation instructions
1.This driver is for four-way series printersUniversal driver, can support:
Four-way 5330SC, four-way 5530SC, four-way 5630SP, four-way 5730SP, four-way 5560SC,
Four-way 5660SP, Four-way 5860SP, Four-way 8370C, Four-way 8570C, Four-way 8570C+,
Four Pass 8358SC, etc.
2. If garbled characters appear when printing, please set the printer port to a standard printer port (not ECP mode).
3. Since the four-way 5660SP and the four-way 5860SP support two-way communication, new hardware will be detected when the computer is turned on. Please press the paper positioning + line feed + function selection keys to turn on the printer. After the print head moves, let go, and press the line feed key to "I /F Bi-directional" item, press the online key to change its value to Invalid, and finally press the paper position key to save.
4. When printing an A3 format form, interlacing occurs. It is because the top position of the paper you set is higher. Please adjust the position of the top of the paper downward to solve the problem.
The modification method of ECP mode is as follows
(If the printer prints garbled characters under the 95/98,2000 system, please change this)
Control Panel-System-Device Manager-Port-Double-click "ECP Printer Port (LPT1)"-Driver-Upgrade Driver-Show Driver All List-Show All Hardware-In "Model", select "Printer Port" ( This process requires WIN95 or WIN98 installation disk)
it works
it works
it works