Instructions for use
1. Download and open 3CDaemon.EXE. This software can support tftp ftp and other services. The interface is as follows:
2. Add new users, set passwords and ftp folders
3. Set ip on the board
>ipconfig eth0 192.168.1.11
4. Confirm that you can communicate with linux
>ping 192.168.1.12 //Host IP
5. Enter the directory where the file needs to be transferred and start ftp
>cd tmp
>ftp 192.168.1.12 21 // 21 default port
6. Set the transfer file format
>bin //Transfer binary file
7. Transfer files
>get hello.img
8. Exit
Configuration method
1. Device configuration that requires logs
Additional configurations required for equipment (routers, switches):
#info-center loghost 11.60.133.7 // IP is the IP address of the host where 3CDaemon software is installed #
2. 3CDaemon software configuration:
(1) As shown in the figure, create a new folder
(2) Select "Only the IP address specified by me" in the drop-down menu
3. Set the IP address and save it after the setting is completed.
Useful
Useful
Useful