Instructions for use
The total burn-in time in the first stage is 30 hours. Personally, it is recommended to burn-in the machine for 3-5 hours a day, and the continuous burn-in time should not exceed 2 hours;
The total burn-in time in the second stage is 50-80 hours. Personally, it is recommended to burn-in the machine for 3-5 hours a day, and the continuous burn-in time should not exceed 2 hours;
The total burn-in time in the third stage is 50 hours. Personally, it is recommended to burn-in the machine for 3-5 hours a day, and the continuous burn-in time should not exceed 2 hours;
What are earphones?
The "cooking" of headphones is actually cooking the diaphragm ring. The mechanical compliance of the diaphragm ring of new headphones is poor, resulting in relatively large distortion. After a period of use, the compliance gradually improves and the distortion will gradually drop to normal levels. . For the headphone amp, as long as it is not turned off, it is turned off, but for the headphones, a certain power signal must be fed to make the diaphragm vibrate continuously.
The essence of listening to earphones is not to listen to electronic music at too high a volume with new earphones, so as not to damage the earphones that have not yet been "stretched". As long as it is not electronic rock music, you can listen to some soft music or light music by the way. It's best to listen naturally and don't deliberately play for a long time, as this will damage the headphones.
As we all know, new cars, machines, etc., must go through a stage called "run-in" before normal use, so that the internal mechanical devices can fully coordinate and cooperate and enter the best condition in advance. The same goes for headphones.
it works
it works
it works