Introduction to the functions of BatteryMon repair battery tool
1. View the charge/discharge rate graphically.
2. Use detailed statistical information to diagnose problem battery cells.
3. Compare and measure battery performance and expected discharge rates.
4. Check the critical discharge point of the battery.
5. Uniquely identify battery packs for tracking purposes or systemsInventory.
6. Record the battery performance for future reference.
7. When using multiple batteries, please check the status of each battery pack.
BatteryMon battery repair tool installation tutorial
This site provides you with the green version of BatteryMon battery repair tool to download. After decompressing it, you can double-click it to run it without installation.
How to use BatteryMon battery repair tool
1. First, connect the notebook to the power source to charge it, and then run the BatteryMon battery repair tool on the charging notebook (double-click to open it).
If the following interface appears: Friends, just click the [Start] button in the lower left corner.
2. At this point, you need to wait patiently for a while. After the laptop is fully charged, you can directly shut down the laptop, unplug it (laptop power plug) and then find the power button to turn it on.
3. After the notebook is turned on, find the BatteryMon battery repair tool and double-click it to open it and run the program again. At this time, the screen will show that the battery repair tool is discharging (the first discharge). The discharge process requires you to wait patiently for a period of time until the discharge is completed, and then the computer will shut down on its own.
4. Wait for the notebook to shut down completely and then plug in the notebook power plug again, then find the BatteryMon battery repair tool and double-click it to open it. At this time, the charging status will be displayed on the interface. This process also requires you to wait patiently until the charging is completed and manually shut down the notebook and remove the power plug.
5. Then find the power switch, turn on the notebook and run the program. The program will then show that it is discharging (second discharge). You need to wait patiently for the discharge to end and wait for it to shut down automatically.
6. After the shutdown is completed, the repair work of the laptop battery has been successfully completed. You can continue to use the computer as you normally use the laptop (remember to connect the power supply first to avoid insufficient battery during use).
BatteryMon Repair Battery Tool FAQ
What batteries is BatteryMon compatible with?
Any laptop or UPS that complies with the Windows Advanced Configuration and Power Interface (ACPI) specification should be able to report information to BatteryMon. Older PCs may also have problems if their BIOS doesn't support ACPI. Certain battery types may not support certain features, often in which case they only report partial information. There are also issues with UPS manufacturers not providing compatible equipmentdriveprogram, you cannot use the BatteryMon software.
How to set the BatteryMon battery repair tool to automatically alarm when the battery is low?
1. Open BatteryMon RepairbatteryFind the [Edit] button in the tool, find Configuration...click it.
2. Jump to the following interface: The user sets the value he wants according to the selected position in the picture. As long as the battery power is lower than the parameter standard you set, an alarm will be issued. (You can correspond to the parameter according to the unit after the parameter)
BatteryMon repair battery tool update log:
1. Free upgrade to BatteryMon 2.1 for existing BatteryMon customers.
2. Starting from version V2.1 build 1008, no license key is required to use the software. Therefore, existing customers can download and use the current version without restrictions.
|
Huajun editor recommends: BatteryMon (laptop battery repair tool) can also support computers and UPS that are compact and portable. Friends in need can download and try it out. If you are not used to this software, you might as well give it a tryMaster Lu,SiSoftware Sandra,HD Tune Pro,WinBench99,cpu-zWait for the software, I hope you like it! |
Useful
Useful
Useful