Fuji Xerox printer driver configuration information
Printing speed: 17ppm(letter)/16ppm(A4)
Memory: 8MB
Printing resolution: 600×600dpi
Interface: USB 1.1 (compatible with USB2.0)
Hardware ID: USBPRINTXeroxPhaser_3117872C
How to install Fuji Xerox printer
1. First of all, you need to know the model number of your Fuji Xerox printer. How to check specifically:
(1) The first type: you can find it directly on the Fuji Xerox printer, just on the side of the Fuji Xerox printer;
(2) The second type: turn on the computer and find the start menu bar, click on it, select devices and printers, and add a network/local printer;
(3) The third method: View the user manual of the current device;
2. Directly find the "Download Address" on this page, select any address to download the Fuji Xerox printer driver to your local area; double-click the Fuji Xerox printer driver 3117 software package to decompress it to find the .exe format program and run it. As follows: Click [Accept] directly to start the installation.
3. Wait for it to configure itself and the following screenshot will appear: Click the [Start Installation] button according to the prompts to officially enter the installation steps of the Fuji Xerox printer driver.
4. When the installation starts, the Fuji Xerox printer driver installation agreement interface will appear. We need to roughly understand the content of the agreement and agree to the agreement before continuing the installation. If you accept, please check the Agree to Agreement option and click [Next] to continue the installation.
5. After agreeing to the agreement, the connection method interface will appear. There are three connection methods in this interface, namely"USB cable connection", "Wireless or Ethernet connection", "Use an existing port". The editor uses"Wireless or Ethernet connection" is used as an example for demonstration. You can choose the installation method that suits you.
6. After setting, the Fuji Xerox printer driver will search for shared printers in the current LAN until the search is successful.
7. The printers found are as follows: Please confirm whether the current printer is your printer, select your printer and click [Next] to continue the installation.
8. Finally, you will enter the installation progress bar interface of the Fuji Xerox printer driver, and wait patiently for its installation. Until the "Ready to Print" interface appears, it means that the Fuji Xerox printer driver has been successfully installed. Click the [Finish] button. Please do not check Restart immediately. Just shut down and restart the computer when you are not using it.
How to use Fuji Xerox printer driver
1. If you want to use a printer to print something, then you need to prepare the electronic information you need and wait for printing. Then run the CD-ROM drive and select the start menu bar to add a printer.
2. Start adding printers, remember not to choose automatic detection or install plug-and-play printers.
3. Because the printing port is divided intoParallel port and USB USB, so you have to create your own port
4. Finally, just choose to install the appropriate driver from the disk. In the next step, click Install from Disk to select the appropriate driver and it will be OK.
Fuji Xerox printer driver update log
Update and optimize some functions
Fix known bugs
|
Huajun editor recommends: If you encounter an error message that cannot be connected to the computer when using a Fuji Xerox printer, you can download the Fuji Xerox printer driver to solve the abnormal problem. There are many different printer models. Friends, please confirm your printer model first and then look for the corresponding driver model. The Fuji Xerox printer driver model compiled by Huajun editor for you is Fuji Xerox phaser3117. In addition, the editor of Huajun has also collected and compiled other disk repair tools for you to choose and download, such as: NVIDIA GeForce6/GeForce 600 series graphics card drivers, etc. |
it works
it works
it works