UC2 video surveillance software software introduction
UC2 video surveillance client is a powerful surveillance software that integrates multi-window, multi-user, voice intercom, alarm center, video recording, TV wall, electronic map, forwarding, multi-screen display control, etc. It is compatible with other expansion products and can be directly connected to a single machine. Equipment monitoring system and other functions are integrated.
Introduction to UC2 video surveillance software interface
1. Function switching keypad:
There are three main functional areas: video surveillance, video playback, and alarm query.
2. Video window area:
Perform specific application or display operations corresponding to the operations selected in the device list in the left area and the toolbar in the upper area.
3. PTZ control area
PTZ control is divided into three control modes: interface operation control, full-screen mouse control, and external keyboard joystick control.
PTZ interface control: that is, by operating the PTZ control interface of the client to perform corresponding PTZ control, including up, down, left, and right,
Adjust the light, adjust the focus, zoom in, zoom out, set/query/delete preset points and call advanced functions, etc.; when the user controls up, down, left, right, light, focus, zoom in, and zoom out, the corresponding Press and hold the left button on the function key to start, release the left button to stop. You can choose to adjust the horizontal and vertical control speed during direction control.
4. Equipment list area:
The device list is displayed in two ways: "original grouping" and "property grouping". "Original grouping" is the device group name + device
The name of the domain it belongs to is used as the middle node of the device tree; the camera devices belonging to the device group and domain are displayed as leaf nodes of the device tree. "Attribute grouping" uses the device name of the IPC as the middle node of the device tree, and displays the camera sub-device under the IPC as the leaf node of the device tree.
5. Video surveillance toolbar:
The video window can be switched between dual streams, voice intercom/broadcast, screenshot, sound switch, and screen lock; it can also be used for full screen, single window, 4 windows, 6 windows, 8 windows, 9 windows, 16 windows, etc. 25-window and 36-window display.
UC2 video surveillance software software features
Support lock screen function.
Support video playback window to display various playback statuses.
Supports TV wall function.
Supports TV wall patrol function.
Supports decoding window display of decoder and encoder functions.
Support electronic map function.
Supports multi-screen display function, up to 4 screens.
Supports PTZ control function.
Support voice intercom function.
Support voice broadcast function.
Support remote device forwarding function.
Supports display of real-time device alarm information.
Supports electronic amplification and electronic pan/tilt functions.
Supports displaying different operation interfaces according to different user permissions.
Support the display function of front-end device list.
Supports online and offline grouping functions of front-end devices.
Supports maintenance and management of the online status of front-end equipment.
Supports multi-screen and full-screen display control functions of video windows.
Supports real-time video streaming monitoring function.
Supports the right-click pop-up menu to automatically play video streams according to the device group name.
Supports playback window video tour function.
Supports selected device segment recording function
Supports play window video stream interactive position function.
Supports real-time sound switch control of the video surveillance window and display and maintenance of corresponding status.
Supports display and maintenance of recording status in each video window.
Supports the control and management function of restoring the last monitoring state.
Supports YUV format accelerated display (if the graphics card does not support YUV, RGB display will be used).
Support front-end video direct playback function.
Supports the function of playing alarm sounds when an alarm occurs.
Supports query playback of historical videos (including local and front-end) and front-end video download functions.
Supports query playback of device (local device, remote device) recordings (including local and front-end) and front-end recording download functions.
Supports querying historical alarm information of front-end devices.
Supports the function of adding custom PTZ protocol.
Supports the function of switching main stream between sub-streams when converting video windows.
Support picture capture function.
Support local recording function.
Supports local video recording and four-screen simultaneous playback function.
UC2 video surveillance software installation steps
1. Download the UC2 video surveillance software from the Huajun Software Park and unzip it to the current folder, then click the UC2_x64_5.0.1.1_setup.exe application. If your computer is 32-bit, click UC2_x32_5.0.1.1_setup .exe. Then the language to choose for installation appears.
2. Now we enter the installation wizard interface and click Next.
3. Select the installation location. Huajun editor recommends users to install in the D drive. After selecting the installation location, click Install.
4. The UC2 video surveillance software is being installed. Users can wait patiently for the progress bar to be full.
5. The installation of UC2 video surveillance software is completed.
UC2 video surveillance software usage instructions
Double-click to open the program. The UC2 client has two login methods: logging in to the cloud platform and not logging in to the cloud platform. It supports QR code scanning, which is convenient for users to operate on their mobile phones.
When not logging into the cloud platform, use the default account admin and password 123456 for initial login. After logging in, you can freely set your account and password.
Checking "Automatic login" will automatically save the password, and this dialog box will no longer pop up the next time you run UC to automatically log in. Check "Save Password" to save the password. After successful login, you do not need to enter the password the next time you log in. In order to ensure the security of using the software, if the user checks "Save Password", then when logging in again after logging out of UC, the password column will display a 32-bit key.
Check "Log in to the cloud platform". The account number and password are the passwords of the account registered on the cloud platform, and the IP address is the cloud platform address. After logging in to the cloud platform, you can only automatically obtain all devices authorized to the account to implement functions such as preview, recording, and playback. You cannot remotely configure and manage cloud devices or add and manage local devices.
UC2 video surveillance software update log
1. Modify user-submitted bugs
2.Add new features
Huajun editor recommends:
As a software that is continuously updated and iterated, UC2 video surveillance software has been transformed in version updates again and again, more in line with user needs, and bringing users a very high user experience. The editor of Huajun Software Park recommends everyone to download and use it. In addition there areYouluoke PC version,Enterprise Fluorite Cloud,Eagle Netcom computer client,Jinwanwei dynamic domain name resolution software,Happy orange with lightRelated software is also pretty good and can be downloaded and used.
it works
it works
it works