Rhino7.0 software functions
1. Modeling tools
Points: point objects, point clouds, grid points, points extracted from objects, markers (intersection points, bisection points, draft angles, end points, closest points, focus)
Curve: straight line, compound line, compound line on grid, free curve, circle, arc, ellipse, rectangle, polygon, spiral, curved line, parabola, TrueType text, interpolation point, control point (vertex), freehand drawing curve.
Create curves from other objects: through points, through composite lines, extend curves, continuation curves, round, round, offset, blend, arc blend, bidirectional projection, bisecting curve, cross-section line, intersection Lines, Nurbs surfaces and mesh section lines, contour curves, extracting structural lines, extracting curvature analysis first, straight projection, normal projection, freehand curve drawing on surface/grid, wire frame, separated shearing, with dimensions and 2D diagram with text annotation, flattened developable surface.
Surface: from 3 or 4 points, from 3 or 4 lines, from a flat surface, from grid lines, quadrilaterals, deformable planes, extrusion, ribbons, lofting, tangent connection limited lofting, expandable, limited edge connection Sweep along the path, limit the edge connection, sweep along the two edges, rotate, track rotate, divide the surface, blend, inlay, curtain, grid, image grayscale height, round, chamfer, offset , Create flat surfaces from points, TrueType and Unicode (double-byte) text.
Entities: squares, spheres, cylinders, rings, tubes, cones, trapezoidal cones, pyramids, flat-top pyramids, elliptical spheres, round tubes, plane extension curve extrusion, surface extrusion, edge sealing, surface combination, non- Popular edge merging, TrueType text, Unicode (double-bit) text.
Grid: Nurbs conversion grid, closed compound line creation grid, grid surface, plane, square, cylinder, cone and sphere.
Rhino 6 improves many existing features and adds many new ones.
2. Edit
Main tools: delete, delete duplicate objects, combine, trim, unbuild, split, explode, extend, round, chamfer, object properties, construction history.
Change tools: cut, copy, paste, move, rotate, mirror, scale, extend, align, align, twist, bend, taper, tilt, offset, positioni, flow along curve, pull back, project, Block editing, flattening, and expansion.
Points and curves: control points, edit points, handles, smooth, smooth, modify order, add/delete nodes, add sharp points, rebuild, trim, match, simplify, modify weight, periodicity, adjust end shape, adjust stitching Line, position the curve to the edge, convert it to an arc, a compound line or a straight line segment.
Surface: control points, joystick, modify order, add/remove nodes, match, extend, blend, combine, inverse shear, ISO separated surface, reconstruction, reduction, periodization, Boolean (union, difference, intersection ), unfold the single surface and extend the curve array on the surface.
Solids: chamfer, surface extraction, Boolean (union, difference, intersection).
Mesh: explode, combine, weld, unify normals, convert to curved surface, reduce the number of polygon faces.
Editing complex models is faster and easier in Rhino 6.
3. Interface
User Interface: Coordinate system readout, dynamic and dockable command bar, recently used command pop-up menu, click-to-click command options, automatic command bar, custom pop-up command items, pop-up layer management, synchronized views, camera-based View operation, matching picture perspective, middle mouse button menu can be set, customizable icons and user working directories, customizable pop-up toolbar, transparent toolbar, contextual right-click menu, dockable dialog box, support Multi-monitor, Alt key copy and OpenGL anti-aliasing hardware support.
Auxiliary tools: Unlimited Undo and redo, multi-step undo and redo, accurate numerical input, units include feet, metric and imperial, X, Y, Z point filters, object snapping, grid line snapping, orthogonal, plane Mode, construction plane naming, construction plane history, origin through curve construction plane, layer, layer filter, group, bitmap background, object show/hide, select display object, select object by layer, select front Object, color, object type, previously selected object, swap hidden objects, object lock/unlock, unlock selected object, show/hide control points and edit points, close selected object points.
4. Display
Ultra-fast 3D image display, unlimited working window, coloring, working perspective, perspective working perspective, rename perspective, floating perspective, full screen display, 3D stereoscopic display, display order support, two-point perspective, section plane and full size1 Than 1 shows the model.
5. Rendering
High-quality renderings play a decisive role in the design project proposal.
Features include: Rhino rendering, support for materials, maps, highlights, transparency, target spotlights, angle and direction controls, point lights, directional lights, rectangular lights, tube lights, and shadows, ray tracing rendering of custom pixels, preview rendering, selection Real-time rendering preview of objects, rotating disk, RIB output, POV output, support for rendering plug-ins, and support for saving settings to files.
Rhino7.0 software features
1. Unconstrained free-form 3D modeling tool. In the past you could only find these tools in similar software that cost twenty to fifty times the price. Allowing you to create any shape you can imagine.
2. Accuracy, fully consistent with the precision required for design, rapid prototyping, engineering, analysis and manufacturing of everything from aircraft to jewelry.
3. Compatible with other design, drawing, CAM, engineering, analysis, coloring, animation and illustration software.
4. Read and repair difficult-to-process IGES documents.
5. Easy to use. It is very easy to learn to use, allowing you to focus on design and imagination without being distracted by the operation of the software.
6. High efficiency, does not require special hardware equipment, and can be executed even on ordinary notebook computers.
7. Development platform for hundreds of professional 3D products.
8. Economical and affordable. Ordinary hardware equipment is easy to use, the price is equivalent to ordinary Windows software, and no additional maintenance costs are required.
Rhino7.0 configuration requirements
1. Hardware:
8 GB or above memory capacity (RAM) recommended.
600 MB disk space.
A graphics card that supports OpenGL 4.1 is recommended.
CPUs with more than 63 cores are not supported.
A two-button mouse with a scroll wheel is recommended.
Support for SpaceNavigator devices.
2. Operating system recommendation:
Windows 10, 8.1, or 7
3. Not supported:
Linux
Windows 8
Windows XP 64-bit
Windows Vista, NT, 95, 98, ME, or 2000
All 32-bit editions of Windows
OSX virtual systems such as VMWare and Parallels
OS X 10.10.4 (early Yosemite) and earlier
Rhino7.0 installation steps
1. Download the software compressed package file in Huajun Software Park, first click "rhino_en-us_7.0.19009.12085.exe" to install the original program
2. Click the settings button next to the [Install Now] button to install and set up Rhino 7. Chinese is optional. However, there was no response after downloading for a long time. It is probably because it has not been officially launched in China~
3. Wait for the program to be installed and click the [Close] button to exit the wizard.
How to use Rhino7.0
How to create a cone?
The first step is to find the Rhino software in the system and open it.
In the second step, select the circle tool in the toolbar
Step 3: Draw a circle in the window
Step 4: Select the extrusion plane to a point in the toolbar
Step 5: Select the drawn circle
Step 6: Enter the height of the cone and press Enter to complete.
Rhino7.0 FAQ
How to perform Boolean operations in Rhino7.0 official version?
The first step is to find the official version of Rhino7.0 software in the system and open it.
In the second step, select the circle tool on the toolbar
Step 3: Draw two intersecting circles
Step 4: Select the Boolean operation command in the toolbar
Step 5: Select the drawn circle and press Enter after completing the selection.
Step 6: Select the part you want to keep and press Enter to complete.
How to create a surface in the official version of Rhino7.0?
The first step is to find the official version of Rhino7.0 software in the system and open it.
In the second step, select the control point curve in the toolbar
The third step is to draw a closed curve
The fourth step is to press the F10 key to open the control point and adjust the position of the control point.
Step 5: Frame the adjusted curve
Step 6: Select the Faceting tool on the toolbar and press Enter to complete the surface.
Comparison of similar software
Autodesk 3ds Max 2008It is a software from abroad used for 3D modeling, animation, rendering and visualization. 3dmax2008 is very powerful. It only takes a few minutes to create exquisite works. It not only provides hierarchical views of scene data and fast Scene analysis and simplified processing of the most complex scenes with many objects, and improved DWG file linking and data support enhances integration with AutoCAD 2008, AutoCAD Architecture 2008 and Revit Architecture 2008 and other software products have collaborative working capabilities and higher drawing efficiency.
Autodesk Netfabb Ultimate 2021 R0The latest version is a 3D modeling design tool suitable for engineering designers. Autodesk Netfabb Ultimate 2021 R0 official version is mainly used to generate, cut, troubleshoot and prepare 3D models for sending to 3D printers. Autodesk Netfabb Ultimate 2021 R0 also provides powerful simulation capabilities that can be used to predict the thermomechanical response of additive parts during metal powder bed fusion and directed energy deposition manufacturing processes, easily helping users reduce build failures.
Rhino7.0 update log
1. Fix bugs in the previous version
2. Optimize some functions
Huajun editor recommends:
Rhino7.0 has always been commonly used by most netizens, and its dominance in the minds of netizens can be seen. It is strongly recommended that users download Rhino7.0 and use it. Come to Huajun Software Park to download it. In addition, there areHaochen CAD,Yaochuang CAD,Huiyi CAD,vray for 3dmax2015,Quick CAD viewing softwareAvailable for download.
it works
it works
it works